Order Products : sales@su-jiao.com
Petrothene® GA808093
| Category: | LLDPE , Linear Low Density Polyethylene |
| Manufacturer: | LyondellBasell Industries |
| Trademark: | Petrothene® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 19LS9X_Petrothene-GA808093.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| PETROTHENE GA 808-093 is a broad molecular weight, linear low density polyethylene resin designed for use as wire and cable insulation. An antioxidant package has been added to ensure thermal stability during processing. The resin also contains a metal deactivator to prevent degradation from copper while the cable is in service. |
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.920 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 0.70 | g/10 min | ASTM D1238 |
| Environmental Stress-Cracking Resistance (10% Igepal) | 1000 | hr | ASTM D1693 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D) | 57 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength | ASTM D638 | ||
| Yield | 11.7 | MPa | ASTM D638 |
| Fracture | 15.2 | MPa | ASTM D638 |
| Tensile Elongation (Break) | 650 | % | ASTM D638 |
| Flexural Modulus - 1% Secant | 345 | MPa | ASTM D790 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Brittleness Temperature | -76.0 | °C | ASTM D746 |
| Electrical | Nominal Value | Test Method | |
|---|---|---|---|
| Dielectric Constant (1 MHz) | 2.29 | ASTM D150 | |
| Dissipation Factor (1 MHz) | 1.0E-4 | ASTM D150 |
| Additional Information |
|---|
| The value listed as Dielectric Constant, ASTM D150, was tested in accordance with ASTM D1531.The value listed as Dissipation Factor, ASTM D150, was tested in accordance with ASTM D1531. |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Cylinder Zone 1 Temp. | 154 - 163 | °C | |
| Cylinder Zone 2 Temp. | 177 - 193 | °C | |
| Cylinder Zone 3 Temp. | 193 - 210 | °C | |
| Cylinder Zone 4 Temp. | 216 - 221 | °C | |
| Adapter Temperature | 216 - 221 | °C | |
| Die Temperature | 216 - 221 | °C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| SABIC® PP 58MNK10 | Saudi Basic Industries Corporation (SABIC) | PP Impact Copolymer | SABIC® PP |
| Unichem 81-403 | Colorite Polymers | PVC, Unspecified | Unichem |
| HAIPLEN EP30 G6 BA | Taro Plast S.p.A. | PP Copolymer | HAIPLEN |
| Hostacom DYS 707N E C11462 | LyondellBasell Industries | PP Copolymer | Hostacom |
| Sylvin 8880-70 LG Black | Sylvin Technologies Incorporated | PVC, Unspecified | Sylvin |
