Order Products : sales@su-jiao.com

INEOS LDPE 23L430

Category:	LDPE , Low Density Polyethylene
Manufacturer:	INEOS Olefins & Polymers Europe
Trademark:	INEOS LDPE
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	18Ny7b_INEOS-LDPE-23L430.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
Benefits & Features 23L430 special polymer structure gives the following properties: Excellent draw down ability with adequate neck-in and stable edges Good process ability also at high line speeds and/or low coating weights Low fumes during extrusion Good adhesion on many substrates Good heat sealing properties Good organoleptical properties Low permeability to moisture and gases Good scratch resistance High purity and very low gel level Applications 23L430 is a low density polyethylene homopolymer for general coating applications. 23L430 coated substrates such as paper, board and aluminium can be used for packaging food and liquids, powders, medical devices, agricultural materials, chemicals and many other products.

Message

Benefits & Features
23L430 special polymer structure gives the following properties:

Excellent draw down ability with adequate neck-in and stable edges

Good process ability also at high line speeds and/or low coating weights

Low fumes during extrusion

Good adhesion on many substrates

Good heat sealing properties

Good organoleptical properties

Low permeability to moisture and gases

Good scratch resistance

High purity and very low gel level

Applications
23L430 is a low density polyethylene homopolymer for general coating applications.

23L430 coated substrates such as paper, board and aluminium can be used for packaging food and liquids, powders, medical devices, agricultural materials, chemicals and many other products.

General Information
Features	Additive Free Good Adhesion Good Drawdown Good Heat Seal Good Organoleptic Properties Good Processability High Purity Homopolymer Low Density Low Gas Permeability Low Gel Low Moisture Vapor Transmission Low to No Fumes Scratch Resistant
Uses	Agricultural Applications Coating Applications Foil Coatings Food Packaging Medical Packaging Packaging Paper Coatings
RoHS Compliance	Contact Manufacturer
Forms	Pellets
Processing Method	Extrusion Coating Injection Molding

Physical	Nominal Value	Unit	Test Method
Density (23°C)	0.924	g/cm³	ISO 1183
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)	4.5	g/10 min	ISO 1133

Thermal	Nominal Value	Unit	Test Method
Vicat Softening Temperature	98.0	°C	ISO 306/A50
Melting Temperature ¹	113	°C	ISO 11357-3

Extrusion	Nominal Value	Unit
Melt Temperature	280 to 325	°C

Note Message
1 .	DSC 2nd heating 10°C/min

Resin Grade	Manufacturer	Category	Trademark
Unichem 8000FR-UV	Colorite Polymers	PVC, Unspecified	Unichem
Zytel® RS 30G30L NC010	DuPont Performance Polymers	Nylon 610	Zytel® RS
Nypol® PA A3 G27 NTLA010 NR364 MSM	Petropol Industry and Trade of Polymers LTDA	Nylon 66	Nypol® PA
Ebalta SG 140 / PUR 12	Ebalta Kunststoff GmbH	PUR, Unspecified	Ebalta
GAPEX® RPP20EU84AL	Ferro Corporation	PP, Unspecified	GAPEX®