Order Products : sales@su-jiao.com
CERTENE™ PBM-2NB
| Category: | PP Impact Copolymer , Polypropylene Impact Copolymer |
| Manufacturer: | Muehlstein |
| Trademark: | CERTENE™ |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 14E4RQ_CERTENEPBM2NB.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| PBM-2NB is a certified prime BLOW MOLDING NO BREAK grade developed for Extra High Izod Impact containers produced by Thermoforming, Extrusion-Blow or Injection-Blow molding equipment. PBM-2NB is a Nucleated resin of high melt strength offering optimized melt stability for consistent, easy processability, and Very Good Low Temperature Drop Impact resistance. PBM-2NB typical applications include pharmaceutical, food and dairy containers, cosmetics, toiletry, and health aid products requiring superior Rigidity, Toughness and Good Organoleptic properties. PBM-2NB complies with FDA regulation 21CFR 177.1520 (a)(3)(i) (c)3.1+3.2, and most international regulations concerning Polypropylene use in contact with food . |
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.902 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 2.0 | g/10 min | ASTM D1238 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Rockwell Hardness 1(R-Scale) | 82 | ASTM D785 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength 2(Yield, Injection Molded) | 29.6 | MPa | ASTM D638 |
| Tensile Elongation 3(Yield, Injection Molded) | 9.0 | % | ASTM D638 |
| Flexural Modulus - 1% Secant 4(Injection Molded) | 1240 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C, Injection Molded) | No Break | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (0.45 MPa, Unannealed) | 88.0 | °C | ASTM D648 |
| Vicat Softening Temperature 5 | 135 | °C | ASTM D1525 |
| Note Message | |
|---|---|
| 1 . | Injection molded |
| 2 . | 50 mm/min |
| 3 . | 50 mm/min |
| 4 . | 1.3 mm/min |
| 5 . | Injection molded |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| NOVAPOL® PF-Y821-MPR | NOVA Chemicals | LLDPE | NOVAPOL® |
| GLAMIDE® T-402 | TOYOBO America, Inc. | Nylon 6 | GLAMIDE® |
| HiFill® XRD PA66 0134 LE | Techmer Engineered Solutions | Nylon 66 | HiFill® |
| Rotuba CAB B9004 (8% Plasticizer) | Rotuba Extruders, Inc. | CAB | Rotuba CAB |
| POTICON BT262 | Otsuka Chemical Co., Ltd. | PBT | POTICON |
