Order Products : sales@su-jiao.com
Vydyne® ECO315J NT0725
| Category: | Nylon 66/6 , Polyamide 66/6 Copolymer |
| Manufacturer: | Ascend Performance Materials Operations LLC |
| Trademark: | Vydyne® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 13vqIA_VydyneECO315JNT0725.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Vydyne ECO315J NT0725 is a non-halogenated, unfilled, flame-retardant PA66/6 copolymer with excellent toughness and ductility. It is stabilized to provide heat stability up to 125°C for 1,000 hours in a dry environment. ECO315J NT0725 is also lubricated for machine feed and easy mold release and has an Underwriters Laboratories UL 94 flammability classification of V-0 at 0.4 mm (0.016") thick. |
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Uses |
|
| UL File Number |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Density | 1.16 | -- | g/cm³ | ISO 1183 |
| Molding Shrinkage | ISO 294-4 | |||
| Lateral flow : 23°C, 2.00mm | 1.4 | -- | % | ISO 294-4 |
| Traffic : 23°C, 2.00mm | 1.2 | -- | % | ISO 294-4 |
| Water Absorption | ISO 62 | |||
| 23°C, 24 hr | 0.80 | -- | % | ISO 62 |
| Equilibrium, 23°C, 50% RH | 2.3 | -- | % | ISO 62 |
| Mechanical | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Tensile Modulus (23°C) | 5000 | 3500 | MPa | ISO 527-2 |
| Tensile Stress (Yield, 23°C) | 75.0 | 52.0 | MPa | ISO 527-2 |
| Tensile Strain | ISO 527-2 | |||
| Yield, 23°C | 5.5 | 20 | % | ISO 527-2 |
| Fracture, 23°C | 25 | 30 | % | ISO 527-2 |
| Flexural Modulus (23°C) | 3200 | 1560 | MPa | ISO 178 |
| Flexural Strength (23°C) | 92.0 | 45.0 | MPa | ISO 178 |
| Poisson's Ratio | 0.40 | -- | ISO 527-2 |
| Impact | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Charpy Notched Impact Strength | ISO 179/1eA | |||
| -30°C | 5.4 | -- | kJ/m² | ISO 179/1eA |
| 23°C | 5.4 | -- | kJ/m² | ISO 179/1eA |
| Charpy Unnotched Impact Strength | ISO 179/1eU | |||
| -30°C | No Break | -- | ISO 179/1eU | |
| 23°C | No Break | -- | ISO 179/1eU | |
| Notched Izod Impact (23°C) | 6.0 | -- | kJ/m² | ISO 180 |
| Thermal | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Heat Deflection Temperature | ||||
| 0.45 MPa, not annealed | 225 | -- | °C | ISO 75-2/B |
| 1.8 MPa, not annealed | 65.0 | -- | °C | ISO 75-2/A |
| Melting Temperature | 244 | -- | °C | ISO 11357-3 |
| Linear thermal expansion coefficient | ISO 11359-2 | |||
| Flow : 23 to 55°C, 2.00mm | 1.1E-4 | -- | cm/cm/°C | ISO 11359-2 |
| Lateral : 23 to 55°C, 2.00mm | 1.1E-4 | -- | cm/cm/°C | ISO 11359-2 |
| RTI Elec | UL 746 | |||
| 0.40 mm | 130 | -- | °C | UL 746 |
| 0.75 mm | 130 | -- | °C | UL 746 |
| 1.5 mm | 130 | -- | °C | UL 746 |
| 3.0 mm | 130 | -- | °C | UL 746 |
| RTI Imp | UL 746 | |||
| 0.40 mm | 65.0 | -- | °C | UL 746 |
| 0.75 mm | 65.0 | -- | °C | UL 746 |
| 1.5 mm | 85.0 | -- | °C | UL 746 |
| 3.0 mm | 85.0 | -- | °C | UL 746 |
| RTI | UL 746 | |||
| 0.40 mm | 100 | -- | °C | UL 746 |
| 0.75 mm | 100 | -- | °C | UL 746 |
| 1.5 mm | 100 | -- | °C | UL 746 |
| 3.0 mm | 110 | -- | °C | UL 746 |
| Electrical | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Volume Resistivity (0.750 mm) | 1.0E+11 | -- | ohms·cm | IEC 60093 |
| Dielectric Strength (1.00 mm) | 13 | -- | kV/mm | IEC 60243 |
| Arc Resistance (3.00 mm) | PLC 5 | -- | ASTM D495 | |
| Comparative Tracking Index (3.00 mm) | 600 | -- | V | IEC 60112 |
| High Amp Arc Ignition (HAI) | UL 746 | |||
| 0.40 mm | PLC 0 | -- | UL 746 | |
| 0.75 mm | PLC 0 | -- | UL 746 | |
| 1.5 mm | PLC 0 | -- | UL 746 | |
| 3.0 mm | PLC 0 | -- | UL 746 | |
| High Voltage Arc Tracking Rate (HVTR) | PLC 1 | -- | UL 746 | |
| Hot-wire Ignition (HWI) | UL 746 | |||
| 0.40 mm | PLC 4 | -- | UL 746 | |
| 0.75 mm | PLC 4 | -- | UL 746 | |
| 1.5 mm | PLC 4 | -- | UL 746 | |
| 3.0 mm | PLC 3 | -- | UL 746 |
| Flammability | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Flame Rating | UL 94 | |||
| 0.40 mm | V-0 | -- | UL 94 | |
| 0.75 mm | V-0 | -- | UL 94 | |
| 1.5 mm | V-0 | -- | UL 94 | |
| 3.0 mm | V-0 | -- | UL 94 | |
| Glow Wire Flammability Index | IEC 60695-2-12 | |||
| 0.40 mm | 960 | -- | °C | IEC 60695-2-12 |
| 0.75 mm | 960 | -- | °C | IEC 60695-2-12 |
| 1.5 mm | 960 | -- | °C | IEC 60695-2-12 |
| 3.0 mm | 960 | -- | °C | IEC 60695-2-12 |
| Glow Wire Ignition Temperature | IEC 60695-2-13 | |||
| 0.40 mm | 875 | -- | °C | IEC 60695-2-13 |
| 0.75 mm | 875 | -- | °C | IEC 60695-2-13 |
| 1.5 mm | 775 | -- | °C | IEC 60695-2-13 |
| 3.0 mm | 725 | -- | °C | IEC 60695-2-13 |
| Oxygen Index | 29 | -- | % | ISO 4589-2 |
| Injection | Dry | Unit | |
|---|---|---|---|
| Drying Temperature | 80 | °C | |
| Drying Time | 4.0 | hr | |
| Suggested Max Regrind | 50 | % | |
| Rear Temperature | 240 - 270 | °C | |
| Middle Temperature | 240 - 270 | °C | |
| Front Temperature | 240 - 270 | °C | |
| Nozzle Temperature | 240 - 270 | °C | |
| Processing (Melt) Temp | 250 - 270 | °C | |
| Mold Temperature | 65 - 95 | °C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Milastomer™ 4010NS | Mitsui Chemicals America, Inc. | TPV | Milastomer™ |
| CP PRYME® ABS A300 BK | Chase Plastics Services Inc. | ABS | CP PRYME® ABS |
| Ecomass® 4702ZB92 | Ecomass Technologies | TPU, Unspecified | Ecomass® |
| KOPLA PA66 KDT1030 | KOPLA Co., Ltd. | Nylon 66 | KOPLA PA66 |
| Kumho KNB 3445G | Korea Kumho Petrochemical Co., Ltd. | NBR | Kumho KNB |
