Order Products : sales@su-jiao.com
Vi-Chem PVC VNC67E
| Category: | PVC, Flexible , Flexible Polyvinyl Chloride |
| Manufacturer: | Vi-Chem Corporation |
| Trademark: | Vi-Chem PVC |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 10y2EF_Vi-Chem-PVC-VNC67E.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Vi-Chem PVC VNC67E is a Flexible Polyvinyl Chloride material filled with 15% mineral. It is available in North America for extrusion. Primary attribute of Vi-Chem PVC VNC67E: Good Flexibility. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Features |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 1.33 | g/cm³ | ISO 1183/A |
| Humidity 1 | No objectionable tackiness |
| Thermal | Nominal Value | Test Method | |
|---|---|---|---|
| Cold Flexibility (-30°C, 4.00 cm) | No cracks | GM 9503P |
| Flammability | Nominal Value | Unit | |
|---|---|---|---|
| Fogging (85°C) 2 | > 93 | % |
| Additional Information | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Color Stability | |||
| -- 3 | Pass | ||
| -- 4 | 1.10 | ||
| Fungal Resistance 5 | A zone of inhibition and no fungal growth | ||
| Pink Stain 6 | No stain | ||
| Volatile Loss | < 1.2 | % | ISO 176 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Shore Hardness (Shore A, 15 sec) | 70 | ISO 868 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress 7(Yield) | 11.0 | MPa | ISO 37 |
| Tensile Elongation 8(Break) | 300 | % | ISO 37 |
| Tear Strength | 37 | kN/m | ASTM D1004 |
| Aging | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Change in Tensile Strength in Air (80°C, 168 hr) | 24 | % | ISO 188 |
| Change in Tensile Strain at Break in Air (80°C, 168 hr) | -5.5 | % | ISO 188 |
| Change in Shore Hardness in Air (Shore A, 80°C, 168 hr) | -29 | ISO 188 |
| Note Message | |
|---|---|
| 1 . | High temperature resistance, GM9329M |
| 2 . | GM9305P, Type A |
| 3 . | Xenon Arc per SAE J1885, 601.6 kJ/m², Surface defects, Delta E |
| 4 . | Xenon Arc per SAE J1885, 601.6 kJ/m², color change, Delta E |
| 5 . | GM9328P |
| 6 . | GM9303P |
| 7 . | Type 1, 500 mm/min |
| 8 . | Type 1, 500 mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| MARPOL® HDM 510 | Marco Polo International, Inc. | HDPE | MARPOL® |
| MonoSol® M7031 | MonoSol, LLC | PVOH | MonoSol® |
| ALCOM® PC 740/4.2 UV WT1100-08LD2 | ALBIS PLASTIC GmbH | PC | ALCOM® PC |
| ASTAMID™ MN-3020X7 | Marplex Australia Pty. Ltd. | Nylon 12 | ASTAMID™ |
| LNP™ LUBRICOMP™ ZFG26 compound | SABIC Innovative Plastics | PPE+PS | LNP™ LUBRICOMP™ |
