Order Products : sales@su-jiao.com
Formolon® 113
| Category: | PVC Copolymer , Polyvinyl Chloride Copolymer |
| Manufacturer: | Formosa Plastics Corporation, U.S.A. |
| Trademark: | Formolon® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 10l9QU_Formolon-113.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
F-113 has been developed primarily to meet the processing requirements of the vinyl composition tile (VCT) manufacturers. In addition to vinyl floor tile industry, F-113 has found success in protective and strippable coatings. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Apparent Density | 0.56 | g/cm³ | ASTM D1895A |
| K-Value | 48.0 | ||
| Vinyl Acetate Content | 13.0 | wt% | |
| Inherent Viscosity | 0.48 | ASTM D1243 | |
| Relative Viscosity | 1.55 | ||
| Sieve Analysis 1 | 100 | % | ASTM D1921 |
| Additional Information | Nominal Value | Unit | |
|---|---|---|---|
| Volatiles | 0.30 | % |
| Note Message | |
|---|---|
| 1 . | Through 40 Mesh Screen, Method B |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| 3M™ Dyneon™ Fluoroplastic PFA 6502NZ | 3M Advanced Materials Division | PFA | 3M™ Dyneon™ Fluoroplastic |
| AEI SX739:CM488-6 | AEI Compounds Limited | HDPE | AEI |
| Bluestar Epoxy E-54 | Bluestar New Chemical Materials Co. Ltd | Epoxy | Bluestar Epoxy |
| Generic Rubber | Generic | Rubber | Generic |
| HiFill® PA4/6 HS | Techmer Engineered Solutions | Nylon 46 | HiFill® |
