Order Products : sales@su-jiao.com
Generic PMMA+PVC
| Category: | PMMA+PVC , Acrylic (PMMA) + PVC |
| Manufacturer: | Generic |
| Trademark: | Generic |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 0yNbbR_Generic-PMMA-PVC.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
This data represents typical values that have been calculated from all products classified as: Generic PMMA+PVC This information is provided for comparative purposes only. |
| General Information |
|---|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.33 to 1.52 | g/cm³ | ASTM D792 |
| Molding Shrinkage - Flow (23°C) | 0.30 to 0.60 | % | ASTM D955 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Rockwell Hardness (23°C) | 93 to 114 | ASTM D785 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength | ASTM D638 | ||
| Yield, 23°C | 34.8 to 42.4 | MPa | |
| 23°C | 41.1 to 74.5 | MPa | |
| Tensile Elongation (Break, 23°C) | 52 to 130 | % | ASTM D638 |
| Flexural Modulus (23°C) | 2200 to 2560 | MPa | ASTM D790 |
| Flexural Strength | ASTM D790 | ||
| 23°C | 62.5 to 82.5 | MPa | |
| Yield, 23°C | 54.1 to 71.8 | MPa |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C) | 58 to 960 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load | ASTM D648 | ||
| 1.8 MPa, Unannealed | 66.2 to 121 | °C | |
| 1.8 MPa, Annealed | 71.5 to 78.9 | °C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Tarnoform® 300 DW | Grupa Azoty S.A. | Acetal (POM) Copolymer | Tarnoform® |
| Endur™ RGD450 | Stratasys | Unspecified | Endur™ |
| EMAC® SP2268 | Westlake Chemical Corporation | EMA | EMAC® |
| E-RIALFILL H 15 SJ 40 C1 | RIALTI Srl | PP Homopolymer | E-RIALFILL |
| LEXAN™ 141 resin | SABIC Innovative Plastics | PC | LEXAN™ |
