Order Products : sales@su-jiao.com
Nycast 6MP
| Category: | Nylon 6 , Polyamide 6 |
| Manufacturer: | Cast Nylons Ltd. |
| Trademark: | Nycast |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 0unkLD_Nycast-6MP.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Designed to address the problems associated with impact loads, NYCAST 6MP formulations provide performance advantages in applications that require improved impact properties over standard grades. NYCAST 6MP cushion pads protect the hammer from metal-to-metal damage in pile drivers and provide many performance advantages in certain gear, die block, valve seat and other applications. This formulation also provides superior performance in extreme cold temperature applications, where standard grades are prone to impact failure. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.14 to 1.16 | g/cm³ | ASTM D792 |
| Water Absorption | ASTM D570 | ||
| 24 hr | 0.50 to 0.60 | % | |
| Saturation | 5.0 to 6.0 | % |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Rockwell Hardness (R-Scale) | 110 to 115 | ASTM D785 | |
| Durometer Hardness (Shore D) | 76 to 78 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus | 2590 to 3030 | MPa | ASTM D638 |
| Tensile Strength | 66.9 to 74.5 | MPa | ASTM D638 |
| Tensile Elongation (Break) | 25 to 35 | % | ASTM D638 |
| Flexural Modulus | 2280 to 2410 | MPa | ASTM D790 |
| Flexural Strength | 82.7 to 89.6 | MPa | ASTM D790 |
| Compressive Modulus | 1930 to 2380 | MPa | ASTM D695 |
| Compressive Strength | 86.2 to 104 | MPa | ASTM D695 |
| Shear Strength | 68.9 to 75.8 | MPa | ASTM D732 |
| Coefficient of Friction (vs. Itself - Dynamic) | 0.22 | ASTM D1894 | |
| Deformation Under Load | 1.00 to 2.00 | % | ASTM D621 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact | 44 to 49 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load | ASTM D648 | ||
| 0.45 MPa, Unannealed | 204 to 221 | °C | |
| 1.8 MPa, Unannealed | 93.3 to 204 | °C | |
| Continuous Use Temperature | 110 | °C | ASTM D794 |
| Melting Temperature | 227 to 238 | °C | |
| CLTE - Flow | 7.2E-5 to 8.1E-5 | cm/cm/°C | ASTM D696 |
| Service Temperature - Intermittent | 166 | °C |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Dielectric Strength | 20 to 24 | kV/mm | ASTM D149 |
| Dielectric Constant | ASTM D150 | ||
| 60 Hz | 3.70 | ||
| 1 kHz | 3.70 | ||
| 100 kHz | 3.70 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| SCHULAMID® 6 MBF 6010 H | A. Schulman Europe | Nylon 6 | SCHULAMID® |
| VENYL SG308 - 3121 | AD majoris | Nylon 6 | VENYL |
| DOMAMID® 66ST2F | DOMO Engineering Plastics SPA | Nylon 66 | DOMAMID® |
| GAPEX® RPP40EB81HB BLACK | Ferro Corporation | PP Homopolymer | GAPEX® |
| Kingfa PA6-RG001 | Kingfa | Nylon 6 | Kingfa |
