Order Products : sales@su-jiao.com
NuSil MED-2245
| Category: | Rubber , Rubber |
| Manufacturer: | NuSil Technology |
| Trademark: | NuSil |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 0tayrh_NuSil-MED-2245.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
NuSil Technology's unrestricted materials may be considered for long-term implant applications (greater than 29 days). High consistency rubber, or HCR, consists of high molecular weight polymer combined with silica to produce a material that can be molded, extruded, or calendared into a useful end product. An HCR has the consistency of clay and is primarily formulated in a one or two part system (peroxide and platinum catalysts, respectively). Most platinum cure high consistency rubbers are two component systems with an easy-to-work-with 1:1 mix ratio. Comments: MIX RATIO (A) 100: (B) 0.7: (C) 0.16 |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Processing Method |
|
| Mechanical | Nominal Value | Unit | |
|---|---|---|---|
| Tensile Strength (200% Strain) | 1.38 | MPa |
| Thermoset | Nominal Value | Unit | |
|---|---|---|---|
| Thermoset Components | |||
| Part C | Mixing ratio by weight: 0.16 | ||
| Component a | Mixing ratio by weight: 100 | ||
| Component B | Mixing ratio by weight: 0.70 | ||
| Post Cure Time (148°C) | 2.0 | hr |
| Additional Information | Nominal Value | Unit | |
|---|---|---|---|
| Cure System | Platinum | ||
| Plasticity: 95 mils |
| Uncured Properties | Nominal Value | Unit | |
|---|---|---|---|
| Density | 1.13 | g/cm³ | |
| Curing Time (171°C) | 0.17 | hr |
| Cured Properties | Nominal Value | Unit | |
|---|---|---|---|
| Shore Hardness (Shore A) | 40 | ||
| Tensile Strength | 10.5 | MPa | |
| Tensile Elongation at Break | 800 | % | |
| Tear Strength | 35.0 | kN/m |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Thermec™ 4301R35H | Technical Polymers, LLC | PPA | Thermec™ |
| Capilene® S 89 E | Carmel Olefins Ltd. | PP Homopolymer | Capilene® |
| Escorene™ Ultra UL 7760 | ExxonMobil Chemical | EVA | Escorene™ Ultra |
| INSPIRE™ 114 | Braskem America Inc. | PP Impact Copolymer | INSPIRE™ |
| EnviroTPE 75A | West Michigan Compounding | TPE | EnviroTPE |
