Order Products : sales@su-jiao.com
Prime 6010 WHT
| Category: | PVC, Rigid , Rigid Polyvinyl Chloride |
| Manufacturer: | Prime PVC® |
| Trademark: | Prime |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 0tFzIB_Prime-6010-WHT.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Exterior sheet extrusion rigid PVC. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.46 | g/cm³ | ASTM D792 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D) | 81 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus | 2620 | MPa | ASTM D638 |
| Tensile Strength (Yield) | 44.8 | MPa | ASTM D638 |
| Flexural Modulus | 2930 | MPa | ASTM D790 |
| Flexural Strength (Yield) | 82.7 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact | 800 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (1.8 MPa, Unannealed) | 71.1 | °C | ASTM D648 |
| CLTE - Flow | 5.8E-5 | cm/cm/°C | ASTM D696 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Melos™ FM 1224 | Melos GmbH | IIR | Melos™ |
| Grilamid® TRVX-50X9 nat | EMS-GRIVORY | Nylon 12 | Grilamid® |
| Haysite SMC 42000 | Haysite Reinforced Plastics | Polyester, TS | Haysite SMC |
| HiFill® PA6 GF33 HS L | Techmer Engineered Solutions | Nylon 6 | HiFill® |
| POLYabs S20 | Polykemi AB | ABS | POLYabs |
