Order Products : sales@su-jiao.com
Desmopan® DP 6088AU
| Category: | TPU, Unspecified , Thermoplastic Polyurethane Elastomer |
| Manufacturer: | Covestro - PUR |
| Trademark: | Desmopan® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 0t6hDH_Desmopan-DP-6088AU.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| injection molding grade; very good hydrolysis and microbial resistance; easy-flowing; with special UV stabilizers; injection molding grade; very short cycle times; very easy release; Cylindrical pellets; hard - soft systems |
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| RoHS Compliance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density (23°C) | 1.13 | g/cm³ | ISO 1183 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Shore Hardness (Shore A, 23°C) | 88 | ISO 868 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Abrasion Resistance (23°C) | 31.0 | mm³ | ISO 4649-A |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Impact Resilience (23°C) | 43 | % | ISO 4662 |
| Films | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress | ISO 527-3/200 | ||
| Break, 23°C | 26.0 | MPa | |
| 100% Strain, 23°C | 8.20 | MPa | |
| 300% Strain, 23°C | 14.1 | MPa | |
| Tensile Elongation (Break, 23°C) | 550 | % | ISO 527-3/200 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tear Strength 1(23°C) | 46 | kN/m | ISO 34-1 |
| Compression Set | ISO 815 | ||
| 23°C, 72 hr | 23 | % | |
| 70°C, 24 hr | 55 | % |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Processing (Melt) Temp | 200 to 220 | °C | |
| Mold Temperature | 20.0 to 40.0 | °C |
| Note Message | |
|---|---|
| 1 . | 500 mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| S&E PVC GA-1055 | S&E Specialty Polymers, LLC | PVC, Unspecified | S&E PVC |
| Vyncolit® 1904B | Vyncolit N.V. | Epoxy | Vyncolit® |
| EMLON® 6 HV | EMAS Plastik San.Tic.AS. | Nylon 6 | EMLON® |
| HiFill® PA6 LGF35 HS L 12mm | Techmer Engineered Solutions | Nylon 6 | HiFill® |
| EPIMAX® PC-900F | Osterman & Company | PC | EPIMAX® |
