Order Products : sales@su-jiao.com
NYCOA Polyamide 7551 T
| Category: | Nylon 12 , Polyamide 12 |
| Manufacturer: | Nycoa (Nylon Corporation of America) |
| Trademark: | NYCOA Polyamide |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 0r5G7t_NYCOA-Polyamide-7551-T.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
NYCOA 7551 T is a heat stabilized Nylon 12 alloy that offers outstanding toughness, flexibility, and impact strength. It has been specially formulated to give excellent resistance to zinc chloride and other automotive fluids. The material offers high resi NYCOA 7551 T is suitable for both injection molding and extrusion. It exhibits outstanding processability, chemical resistance, good heat stability and an excellent balance of mechanical properties. This grade is available with custom additive packages: UV stabilizer, flame retardant and/or custom colors. Typical applications include high performance automotive tubing; air brakes, fuel lines and lube lines and profile extrusion. |
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Uses |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.01 | g/cm³ | ASTM D792 |
| Water Absorption | ASTM D570 | ||
| 24 hr | 0.34 | % | ASTM D570 |
| Saturation | 1.0 | % | ASTM D570 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength 1 | 45.0 | MPa | ASTM D638 |
| Tensile Elongation 2(Break) | 300 | % | ASTM D638 |
| Flexural Modulus 3 | 400 | MPa | ASTM D790 |
| Flexural Strength 4 | 15.9 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (6.35 mm) | 850 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | |
|---|---|---|---|
| Melting Temperature | 174 - 206 | °C |
| Additional Information |
|---|
| Tensile Elongation at Break, ASTM D638, 2 in/min: 300+%The value listed as Melting Point, was tested in accordance with ASTM D789. |
| Note Message | |
|---|---|
| 1 . | 51 mm/min |
| 2 . | 51 mm/min |
| 3 . | 51 mm/min |
| 4 . | 51 mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Nilac TRH | Soredi S.p.a. | ABS | Nilac |
| Kynar® 740 | Arkema | PVDF | Kynar® |
| Hostacom PF062-2 NA NATURAL | LyondellBasell Industries | PP Homopolymer | Hostacom |
| Diakon® CTG625 | Lucite International Holland BV | Acrylic (PMMA) | Diakon® |
| Sylvin 9773-70 Grey 9609 | Sylvin Technologies Incorporated | PVC, Unspecified | Sylvin |
