Order Products : sales@su-jiao.com
TECACOMP® PBT TC white 4037
| Category: | PBT , Polybutylene Terephthalate |
| Manufacturer: | Ensinger GmbH |
| Trademark: | TECACOMP® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 0qPLud_TECACOMPPBTTCwhite4037.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
Main features
Target Industries
|
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Features |
|
| Uses |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 1.73 | g/cm³ | |
| Apparent Density | 0.92 | g/cm³ | ISO 60 |
| Melt Mass-Flow Rate (MFR) (280°C/5.0 kg) | 42 | g/10 min | ISO 1133 |
| Melt Volume-Flow Rate (MVR) (280°C/5.0 kg) | 50.0 | cm³/10min | ISO 1133 |
| Molding Shrinkage | ISO 294-4 | ||
| Transverse flow | 1.5 | % | ISO 294-4 |
| Flow | 1.5 | % | ISO 294-4 |
| Water Absorption (Equilibrium, 23°C, 50% RH) | < 0.10 | % | ISO 62 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus | 7300 | MPa | ISO 527-2/50 |
| Tensile Stress | 72.0 | MPa | ISO 527-2/50 |
| Tensile Strain (Break) | 2.0 | % | ISO 527-2/50 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Charpy Unnotched Impact Strength | 40 | kJ/m² | ISO 179/1eU |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Heat Deflection Temperature (1.8 MPa, Unannealed) | 167 | °C | ISO 75-2/A |
| Glass Transition Temperature | 60.0 | °C | DIN 53765 |
| Melting Temperature | 225 | °C | DIN 53765 |
| Linear thermal expansion coefficient | ISO 11359-2 | ||
| Flow : 23 to 40°C | 5.9E-5 | cm/cm/°C | ISO 11359-2 |
| Flow : 60 to 110°C | 8.6E-5 | cm/cm/°C | ISO 11359-2 |
| Horizontal : 23 to 40°C | 5.9E-5 | cm/cm/°C | ISO 11359-2 |
| Horizontal : 60 to 110°C | 8.5E-5 | cm/cm/°C | ISO 11359-2 |
| Specific Heat | 990 | J/kg/°C | DIN EN 821 |
| Thermal Conductivity 1 | 1.0 | W/m/K | DIN EN 821 |
| Service Temperature | |||
| long term | 110 | °C | |
| short term | 170 | °C | |
| Thermal Diffusivity | DIN EN 821 | ||
| In-plane | 0.500 | cSt | DIN EN 821 |
| Through-plane | 0.500 | cSt | DIN EN 821 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Surface Resistivity | 4.5E+12 | ohms | DIN EN 61340 |
| Volume Resistivity | 3.1E+14 | ohms·cm | DIN EN 61340 |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Flammability Classification | HB | IEC 60695-11-10, -20 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 120 | °C | |
| Drying Time | 3.0 - 6.0 | hr | |
| Suggested Max Moisture | 0.020 | % | |
| Processing (Melt) Temp | 240 - 290 | °C | |
| Mold Temperature | 130 | °C |
| Note Message | |
|---|---|
| 1 . | In-plane |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RTP 4200 | RTP Company | PI, TP | RTP |
| SABIC® LDPE PCG81 | Saudi Basic Industries Corporation (SABIC) | LDPE | SABIC® LDPE |
| Starpylen MF008S | Eurostar Engineering Plastics | PP, Unspecified | Starpylen |
| TROGAMID® CX CX7323 | Evonik Industries AG | Nylon, Unspecified | TROGAMID® CX |
| Nanjing Hongrui PA6 B1000 | Nanjing Hongrui Engineering Plastics Co., Ltd. | Nylon 6 | Nanjing Hongrui PA6 |
