Order Products : sales@su-jiao.com
Glastic® UTS 141
| Category: | Polyester, TS , Thermoset Polyester |
| Manufacturer: | Glastic Corporation |
| Trademark: | Glastic® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 0pqytn_Glastic-UTS-141.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Glastic UTS 141 is a fiberglass-reinforced laminate. This resin is ideal for applications requiring flame and heat resistance, as well as applications requiring higher retention of properties after heat aging. Glastic UTS 141 is ideal for a wide variety of applications, including intricate punchings for switches, switch plates, controls, control panels, and terminal boards. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Features |
|
| Uses |
|
| UL File Number |
|
| Appearance |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.80 | g/cm³ | ASTM D792 |
| Water Absorption (24 hr) | 0.80 | % | ASTM D570 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (yield, 1.60mm) | 55.2 | MPa | ASTM D638 |
| Flexural Strength (1.60 mm) | 124 | MPa | ASTM D790 |
| Compressive Strength (1.60 mm) | 207 | MPa | ASTM D695 |
| Shear Strength | 96.5 | MPa | ASTM D732 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (1.60 mm) | 430 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| CLTE - Flow (1.60 mm) | 2.0E-5 | cm/cm/°C | ASTM D696 |
| RTI Elec (1.60 mm) | 130 | °C | UL 746 |
| RTI (1.60 mm) | 130 | °C | UL 746 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Dielectric Strength 1(1.60 mm, in Air) | 12 | kV/mm | ASTM D149 |
| Arc Resistance (1.60 mm) | 130 | sec | ASTM D495 |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Flame Rating (1.60 mm) | V-0 | UL 94 |
| Additional Information |
|---|
| NEMA Grade: GPO-2/GPO-2PMilitary Specification: L-P 509/GPO-2Ignition Time: 75 minBurn Time: 85 min |
| Note Message | |
|---|---|
| 1 . | Method A (short time) |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RTP 1005 TFE 12 SI 2 | RTP Company | PBT | RTP |
| Sinvicomp DBS3704 | Teknor Apex Asia Pacific PTE. LTD. | PVC, Rigid | Sinvicomp |
| NuSil MED-6350 | NuSil Technology | Silicone | NuSil |
| LEXAN™ PC2200 resin | SABIC Innovative Plastics Asia Pacific | PC | LEXAN™ |
| Sylvin 8205-75UV Brown 7480 | Sylvin Technologies Incorporated | PVC, Unspecified | Sylvin |
