Order Products : sales@su-jiao.com
Glastic® SLC-2000
| Category: | Polyester, TS , Thermoset Polyester |
| Manufacturer: | Bulk Molding Compounds, Inc. |
| Trademark: | Glastic® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 0pmBoB_Glastic-SLC-2000.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Glastic®SLC-2000 is a thermosetting polyester product,. It can be processed by compression molding or injection molding and is available in North America. The main characteristics are: flame retardant/rated flame. |
| General Information | |
|---|---|
| UL File Number |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 2.03 | g/cm³ | ASTM D792 |
| Molding Shrinkage - Flow | 0.20 | % | ASTM D955 |
| Water Absorption (24 hr) | 0.090 | % | ASTM D570 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus | 14800 | MPa | ASTM D638 |
| Tensile Strength (Yield) | 27.6 | MPa | ASTM D638 |
| Flexural Modulus | ASTM D790 | ||
| Molding | 13600 | MPa | ASTM D790 |
| Injection Molding | 12800 | MPa | ASTM D790 |
| Flexural Strength | ASTM D790 | ||
| Molding | 96.5 | MPa | ASTM D790 |
| Injection Molding | 93.1 | MPa | ASTM D790 |
| Compressive Strength | 152 | MPa | ASTM D695 |
| Shear Strength | 46.3 | MPa | ASTM D732 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact | ASTM D256 | ||
| Molding | 290 | J/m | ASTM D256 |
| Injection Molding | 150 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| RTI Elec | 130 | °C | UL 746 |
| RTI Imp | 130 | °C | UL 746 |
| RTI | 130 | °C | UL 746 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Surface Resistivity | 7.4E+14 1.7E+15 | ohms | ASTM D257 |
| Dielectric Strength 1(3.18 mm) | 11 | kV/mm | ASTM D149 |
| Dielectric Constant | ASTM D150 | ||
| 60 Hz | 7.07 7.11 | ASTM D150 | |
| 1 MHz | 5.24 | ASTM D150 | |
| Dissipation Factor | ASTM D150 | ||
| 60 Hz | 0.015 0.017 | ASTM D150 | |
| 1 MHz | 0.019 | ASTM D150 | |
| Arc Resistance | 185 | sec | ASTM D495 |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Flame Rating (1.60 mm) | HB | UL 94 |
| Additional Information |
|---|
| Permittivity, ASTM D150, 60 Hz, Condition A: 7.11Permittivity, ASTM D150, 60 Hz, Condition D: 7.07Permittivity, ASTM D150, 1 MHz, Condition A: 5.24Insulation Resistance, ASTM D257, Condition A: 17.3 Ohm x 10e14Insulation Resistance, ASTM D257, Condition C: 7.38 Ohm x 10e14Track Resistance, ASTM D2303: 1000 minutesDissipation Factor, ASTM D150, 60 Hz, Condition A: 0.017Dissipation Factor, ASTM D150, 60 Hz, Condition D: 0.015Dissipation Factor, ASTM D150, 1 MHz, Condition A: 0.019Electric Strength, ASTM D149, Parallel, S/S in Oil, Condition A: 50 kvElectric Strength, ASTM D149, Parallel, S/S in Oil, Condition D: 48 kv |
| Note Message | |
|---|---|
| 1 . | Method A (short time) |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| NEOFLON™ EP-506 | Daikin Fluorochemicals (China) Co., Ltd. | ETFE | NEOFLON™ |
| NOVADURAN® 5010G30X4 | Mitsubishi Engineering-Plastics Corp | PBT | NOVADURAN® |
| Baoding 76E85 | Baoding Bangtai Polymeric New-Materials Co.,Ltd | TPU-Polyether | Baoding |
| Hyundai EP Breathable AT880H/2102 | HYUNDAI EP Co., Ltd. | Polyolefin, Unspecified | Hyundai EP Breathable |
| Lupolen GX 4087 | LyondellBasell Industries | LDPE | Lupolen |
