Sarlink® TPE RV-2240 Datasheet,TPE,Teknor Apex Company-SHANGHAI SUSHENG

Message
Sarlink TPE RV-2240 is a high performance thermoplastic elastomer used in a variety of transportation applications. Sarlink TPE RV-2240 is a low hardness, low density extrusion grade with good UV resistance.

General Information
Features	Low Specific Gravity Low density smoothness Light stabilization Good UV resistance Low liquidity Lubrication Fill Hardness, low
Uses	Application in Automobile Field Automotive exterior parts Car exterior decoration Rubber substitution
RoHS Compliance	RoHS compliance
Appearance	Black Natural color
Forms	Particle
Processing Method	Extrusion

Physical	Nominal Value	Unit	Test Method
Specific Gravity	0.948	g/cm³	ASTM D792
Melt Mass-Flow Rate (MFR) (200°C/5.0 kg)	5.0	g/10 min	ASTM D1238

Hardness	Nominal Value	Test Method
Durometer Hardness		ASTM D2240
Shaw A, 1 sec	42	ASTM D2240
Shaw A, 5 seconds	40	ASTM D2240

Elastomers	Nominal Value	Unit	Test Method
Tensile Strength (Break)	7.58	MPa	ASTM D412
Tensile Elongation (Break)	650	%	ASTM D412
Tear Strength ¹	19.3	kN/m	ASTM D624
Compression Set (70°C, 22 hr)	28	%	ASTM D395

Legal statement
The information and recommendations contained in this bulletin are, to the best of our knowledge, accurate and reliable but no guarantee of their accuracy is made. All products are sold upon condition that purchasers shall make their own tests to determine the suitability of such products for their particular purposes and uses and purchaser assumes all risks and liability for the results of use of the products, including use in accordance with seller's recommendations. Nothing in this bulletin constitutes permission or a recommendation to practice or use any invention covered by any patent owned by this company or others. There is no warranty of merchantability and there are no other warranties for the products described. For detailed Product Stewardship information, please contact us. Any product of Teknor Apex, including product names, shall not be used or tested in medical or food contact applications without the prior written acknowledgement of Teknor Apex as to the intended use. Please note that some products may not be available in one or more countries.

Legal statement

The information and recommendations contained in this bulletin are, to the best of our knowledge, accurate and reliable but no guarantee of their accuracy is made. All products are sold upon condition that purchasers shall make their own tests to determine the suitability of such products for their particular purposes and uses and purchaser assumes all risks and liability for the results of use of the products, including use in accordance with seller's recommendations. Nothing in this bulletin constitutes permission or a recommendation to practice or use any invention covered by any patent owned by this company or others. There is no warranty of merchantability and there are no other warranties for the products described. For detailed Product Stewardship information, please contact us. Any product of Teknor Apex, including product names, shall not be used or tested in medical or food contact applications without the prior written acknowledgement of Teknor Apex as to the intended use. Please note that some products may not be available in one or more countries.

Injection instructions
Drying is not necessary. However, if moisture is a problem, dry the pellets for 2 to 4 hours at 150°F (65°C).

Extrusion	Nominal Value	Unit
Cylinder Zone 1 Temp.	160 - 204	°C
Cylinder Zone 2 Temp.	166 - 210	°C
Cylinder Zone 3 Temp.	171 - 216	°C
Cylinder Zone 4 Temp.	171 - 216	°C
Cylinder Zone 5 Temp.	177 - 221	°C
Die Temperature	177 - 221	°C

Extrusion instructions
Drying is not necessary. However, if moisture is a problem, dry the pellets for 2 to 4 hours at 150°F (65°C).;Screw Speed: 30 to 100 rpm

Note Message
1 .	C mould

Category:	TPE , Thermoplastic Elastomer
Manufacturer:	Teknor Apex Company
Trademark:	Sarlink® TPE
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	0nkkRd_SarlinkTPERV2240.pdf
PRICE:	Order Products email sales@su-jiao.com

Resin Grade	Manufacturer	Category	Trademark
Salflex 810C-2	Salflex Polymers Ltd.	PP Copolymer	Salflex
RheTech Polypropylene HP531-00	RheTech, Inc.	PP Copolymer	RheTech Polypropylene
XENOY™ X2420 resin	SABIC Innovative Plastics Asia Pacific	PC+Polyester	XENOY™
KumhoSunny AES HW600G	Shanghai KumhoSunny Plastics Co., Ltd.	AES	KumhoSunny AES
LNP™ STAT-KON™ OE006A compound	SABIC Innovative Plastics	PPS, Branched	LNP™ STAT-KON™