Order Products : sales@su-jiao.com
Andur 82 DGP
| Category: | PUR-Ether/TDI , Polyurethane (Polyether, TDI) |
| Manufacturer: | Anderson Development Company |
| Trademark: | Andur |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 0gvGCw_Andur-82-DGP.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Andur 82-DGP is a polyether (PTMG) based liquid, isocyanate terminated prepolymer. An elastomer with a hardness of 82 to 85 Shore D is obtained when this prepolymer is cured with Curene 442 [4,4'-methylene-bis (orthochloroaniline)]. Elastomers of lower hardness can be obtained by reaction with various polyols and their combinations with Curene 442 and other diamines, or by the use of plasticizers. |
| General Information | |
|---|---|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.14 | g/cm³ | ASTM D792 |
| Thermoset | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Thermoset Mix Viscosity | ASTM D2393 | ||
| 70°C | 1700 | cP | ASTM D2393 |
| 100°C | 290 | cP | ASTM D2393 |
| Additional Information |
|---|
| NCO: 10.8 to 11.2%Specific Gravity, ASTM D792, 77°F: 1.14 g/mlSpecific Gravity, ASTM D792, 212°F: 1.12 g/ml |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Resinoid 1360HR | Resinoid Engineering Corporation | Phenolic | Resinoid |
| NYCOA Polyamide 2046 | Nycoa (Nylon Corporation of America) | Nylon 6/69 | NYCOA Polyamide |
| LUVOCOM® 1105-8052/EM/BL VP | Lehmann & Voss & Co. | PEEK | LUVOCOM® |
| 3M™ Dyneon™ Fluoroelastomer FC 1640 | 3M Advanced Materials Division | Fluorelastomer | 3M™ Dyneon™ Fluoroelastomer |
| Sylvin 8773-60D Grey 9536 | Sylvin Technologies Incorporated | PVC, Rigid | Sylvin |
