RheTech Polypropylene GC10P200-819UVBG

Category: PP Copolymer , Polypropylene Copolymer
Manufacturer: RheTech, Inc.
Trademark: RheTech Polypropylene
Fillers: -
Ports: Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms FOB, CIF, DAP, DAT, DDP
PDF: 0cUEGa_RheTech-Polypropylene-GC10P200-819UVBG.pdf
PRICE: ​Order Products​ email   sales@su-jiao.com
Wechat: WECHAT
Message
10% Glass Fiber Reinforced, Chemically Coupled, UV Stabilized, Polypropylene Copolymer, 167A Ebony, Blow Molding Grade
General Information
Filler / Reinforcement
  • Glass fiber reinforced material, 10% filler by weight
Additive
  • UV stabilizer
Features
  • Copolymer
  • Chemical coupling
  • Good UV resistance
Appearance
  • Black
Processing Method
  • Blow molding
PhysicalNominal ValueUnitTest Method
Specific Gravity 0.968g/cm³ASTM D792
Melt Mass-Flow Rate (MFR) (230°C/2.16 kg)0.80g/10 minASTM D1238
HardnessNominal ValueUnitTest Method
Durometer Hardness (Shore D)72ASTM D2240
MechanicalNominal ValueUnitTest Method
Tensile Strength 35.2MPaASTM D638
Flexural Modulus 2450MPaASTM D790
ImpactNominal ValueUnitTest Method
Notched Izod Impact 120J/mASTM D256
Dart Drop Impact 2.82JASTM D5420
ThermalNominal ValueUnitTest Method
Deflection Temperature Under Load ASTM D648
    0.45 MPa, not annealed 141°CASTM D648
    1.8 MPa, not annealed 90.0°CASTM D648
InjectionNominal ValueUnit
Drying Temperature 65.6 - 82.2°C
Drying Time 1.0 - 2.0hr
Suggested Max Moisture 0.050%
Rear Temperature 188 - 216°C
Middle Temperature 193 - 221°C
Front Temperature 199 - 227°C
Nozzle Temperature 188 - 227°C
Mold Temperature 26.7 - 82.2°C
Injection Pressure 2.76 - 10.3MPa
Injection Rate Slow-Moderate
Holding Pressure 2.07 - 8.27MPa
Back Pressure 0.00 - 0.689MPa
Injection instructions
Injection Speed: Slow to ModerateScrew RPM: Screw Recovery 3 seconds Before Mold OpensCycle Time: Variable, Part Design Dependent
Resin Grade Manufacturer Category Trademark
S&E PVC GA-1006 S&E Specialty Polymers, LLC PVC, Unspecified S&E PVC
Bio-Flex® F 6611 FKuR Kunststoff GmbH Biodeg Polymers Bio-Flex®
AMTOPP WT28 Inteplast Group PP, Unspecified AMTOPP
Ateva® 9030 Celanese EVA Performance Polymers EVA Ateva®
Lupoy® 1300-03 LG Chem Ltd. PC Lupoy®