Order Products : sales@su-jiao.com
MARPOL® Homo 3.5
| Category: | PP Homopolymer , Polypropylene Homopolymer |
| Manufacturer: | Marco Polo International, Inc. |
| Trademark: | MARPOL® Homo |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 0bQVzC_MARPOL-Homo-3-5.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Additives: None Recommended Applications: Stationery film, housewares, raffia/tapes/strapping, Also good for clear containers, opaque containers. Homo 3.5 is a low flow polypropylene homopolymer resin available in pellet form. Homo 3.5 is often used in general injection molding or extrusion applications, and is mostfrequently sold into raffia markets. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 0.900 | g/cm³ | ASTM D792B |
| Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 3.5 | g/10 min | ASTM D1238 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Yield) | 35.2 | MPa | ASTM D638 |
| Tensile Elongation (Yield) | 11 | % | ASTM D638 |
| Flexural Modulus | 1530 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C) | 52 | J/m | ASTM D256 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RTP ESD C 203 | RTP Company | Nylon 66 | RTP |
| SINOF P265U | SINOF HI-TECH MATERIAL CO. LTD | PPS | SINOF |
| BP Flex A 6410 NAT | Buckeye Polymers, Inc. | TPE | BP Flex |
| KUBE PIR 22404 | KUBE Electronics AG | HDPE | KUBE PIR |
| Sumikon® PM-6930 | SBHPP | Phenolic | Sumikon® |
