Order Products : sales@su-jiao.com
Polifil® Nylon 730
| Category: | Nylon 6 , Polyamide 6 |
| Manufacturer: | The Plastics Group |
| Trademark: | Polifil® Nylon |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 0aTKl0_Polifil-Nylon-730.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Polifil® Nylon 730 is a Polyamide 6 (Nylon 6) product. It is available in North America. Typical application: Housings. |
| General Information | |
|---|---|
| Uses |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.13 | g/cm³ | ASTM D792 |
| Molding Shrinkage - Flow | 1.2 | % | ASTM D955 |
| Water Absorption | ASTM D570 | ||
| 24 hr | 1.6 | % | |
| Saturation | 9.6 | % | |
| Equilibrium, 23°C, 50% RH | 2.8 | % |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Rockwell Hardness (R-Scale) | 118 | ASTM D785 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Break) | 75.2 | MPa | ASTM D638 |
| Tensile Elongation (Break) | 65 | % | ASTM D638 |
| Flexural Modulus | 2480 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact | 53 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load | ASTM D648 | ||
| 0.45 MPa, Unannealed | 179 | °C | |
| 1.8 MPa, Unannealed | 56.1 | °C | |
| Melting Temperature | 210 | °C |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Rear Temperature | 221 to 243 | °C | |
| Middle Temperature | 227 to 260 | °C | |
| Front Temperature | 238 to 271 | °C | |
| Nozzle Temperature | 232 to 260 | °C | |
| Processing (Melt) Temp | 238 to 271 | °C | |
| Injection Rate | Moderate-Fast |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| SLOVAMID® 6 GF 5 T 20 FRG 2 | Plastcom | Nylon 6 | SLOVAMID® 6 |
| EverGlide® MB1450M | Polymer Dynamix | PBT | EverGlide® |
| Devcon Carbide Putty | Devcon | Epoxy | Devcon |
| Hypel® PELLD5/.935 | Entec Polymers | LLDPE | Hypel® |
| Sumiliteresin® PR-50590 I | SBHPP | Phenolic | Sumiliteresin® |
