Order Products : sales@su-jiao.com
SABIC® LLDPE MG200024
| Category: | LLDPE , Linear Low Density Polyethylene |
| Manufacturer: | Saudi Basic Industries Corporation (SABIC) |
| Trademark: | SABIC® LLDPE |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 0XILUc_SABICLLDPEMG200024.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
SABIC® LLDPE MG200024 is a high flow linear low density polyethylene copolymer grade with a narrow molecular weight distribution. SABIC® LLDPE MG 200024 is in powder form. SABIC® LLDPE MG200024 is well suited for masterbatch applications like blow moulding, injection moulding and film extrusion. Especially for masterbatches with very high carbon black, titanium dioxide or pigment content. Since the resin is supplied in powder form, it is extremely suited for masterbatch production where PE powders are used. The product mentioned herein is in particular not tested and therefore not validated for use in pharmaceutical/medical applications. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.924 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 20 | g/10 min | ASTM D1238 |
| Environmental Stress-Cracking Resistance | 24.0 | hr | ASTM D1693 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D) | 55 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus - 1% Secant | 315 | MPa | ASTM D638 |
| Tensile Strength | ASTM D638 | ||
| Yield | 12.0 | MPa | ASTM D638 |
| Fracture | 8.50 | MPa | ASTM D638 |
| Tensile Elongation (Break) | 450 | % | ASTM D638 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C) | 540 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Brittleness Temperature | < -75.0 | °C | ASTM D746 |
| Vicat Softening Temperature | 94.0 | °C | ASTM D1525 1 |
| Additional Information |
|---|
| Test specimen is prepared from compression moulded sheet made according to ASTM D-1928, procedure C. |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Processing (Melt) Temp | 190 - 230 | °C |
| Note Message | |
|---|---|
| 1 . | 速率 A (50°C/h), 压 力1 (10N) |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| NYCOA Polyamide 1838 | Nycoa (Nylon Corporation of America) | Nylon+TPE | NYCOA Polyamide |
| HiPrene® MT42 | GS Caltex | PP, Unspecified | HiPrene® |
| Innoprene 1550N/B | Kumho Polychem Co., Ltd. | TPV | Innoprene |
| Karina CLEAR PVC COMPOUND -E 78/200-D-IS-SD | Karina Ind. e Com. de Plásticos Ltda | PVC, Unspecified | Karina |
| TechnoMid PA6 S GF 50 | TechnoCompound GmbH | Nylon 6 | TechnoMid |
