Order Products : sales@su-jiao.com
Braskem PE IA 58
| Category: | HDPE , High Density Polyethylene |
| Manufacturer: | Braskem |
| Trademark: | Braskem PE |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 0TfxoV_Braskem-PE-IA-58.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Description: IA58 is a High Density Polyethylene, narrow molecular weight butene-1 copolymer, produced by solution process, for injection molding applications. It offers good processability combined with good impact strength and stiffness. It contains antioxidant additive. Application: Housewares, toys and general purpose containers for indoor applications. |
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 0.957 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 22 | g/10 min | ASTM D1238 |
| Environmental Stress-Cracking Resistance | ASTM D1693 | ||
| 50°C, 2.00mm, 10% Igepal, molded, F50 | < 2.00 | hr | ASTM D1693 |
| 50°C, 2.00mm, 100% Igepal, molded, F50 | < 2.00 | hr | ASTM D1693 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D, Compression Molded) | 55 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength | ASTM D638 | ||
| Yield, molding | 27.0 | MPa | ASTM D638 |
| Fracture, molding | 26.0 | MPa | ASTM D638 |
| Flexural Modulus - 1% Secant (Compression Molded) | 1200 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (Compression Molded) | 35 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (0.45 MPa, Unannealed, Compression Molded) | 77.0 | °C | ASTM D648 |
| Vicat Softening Temperature | 126 | °C | ASTM D1525 1 |
| Additional Information |
|---|
| IA58 has been developed for injection molding under conditions comparable to High Density Polyethylene of similar Melt Flow Index. |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Processing (Melt) Temp | 160 - 230 | °C |
| Note Message | |
|---|---|
| 1 . | 压 力1 (10N) |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| POLYPRO® 1088A | YUHWA Korea Petrochemical Ind. Co., Ltd. | PP Homopolymer | POLYPRO® |
| TOTAL Polypropylene PPC 10712 | TOTAL Refining & Chemicals | PP Impact Copolymer | TOTAL Polypropylene |
| DURANEX® 300FP | Polyplastics Co., Ltd. | PBT | DURANEX® |
| Generic Phenolic | Generic | Phenolic | Generic |
| Kepamid® 2325GVS | Korea Engineering Plastics Co., Ltd | Nylon 66 | Kepamid® |
