Order Products : sales@su-jiao.com

THERMOLAST® M TM7ADT (Series: MC/AD1)

Category:	TPE , Thermoplastic Elastomer
Manufacturer:	KRAIBURG TPE
Trademark:	THERMOLAST® M
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	0SvHEl_THERMOLAST-M-TM7ADT-Series-MC-AD1-.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

WECHAT

Message

The MC/AD1 Series is your material solution for applications requiring basic medical approvals such as ISO 10993-5. The series is characterized by excellent adhesion properties to polar thermoplastics such as PC, ABS, PC/ABS. The compounds are produced exclusively by a special medical unit.

Typical applications

Flexible Connections

Membranes

Seals

Soft touch

Valves

Material advantages

DMF listed

Excellent mechanical properties

For injection molding

Free of animal basedingredients

KRAIBURG TPE Medical service package (description below)

Sterilizable (autoclave 134°C, gammaradiation 2x35 kGy, EtO)

Tested according to ISO 10993-5

General Information
Features	Autoclave Sterilizable Ethylene Oxide Sterilizable Good Adhesion No Animal Derived Components Radiation Sterilizable
Uses	Connectors Medical/Healthcare Applications Membranes Seals Soft Touch Applications Valves/Valve Parts
Agency Ratings	DMF 25604 ISO 10993 Part 5
Appearance	Natural Color
Processing Method	Injection Molding

Physical	Nominal Value	Unit	Test Method
Density	1.00	g/cm³	ISO 1183

Hardness	Nominal Value	Unit	Test Method
Shore Hardness (Shore A)	73		ISO 7619

Elastomers	Nominal Value	Unit	Test Method
Tensile Stress ¹(Yield)	8.00	MPa	ISO 37
Tensile Elongation ²(Break)	650	%	ISO 37
Tear Strength ³	18	kN/m	ISO 34-1
Compression Set ⁴			ISO 815
23°C, 72 hr	22	%
70°C, 24 hr	45	%

Additional Information	Nominal Value	Unit	Test Method
Adhesion to ABS	22.0	kN/m	Renault D41/1916
Adhesion to PC	22.5	kN/m	Renault D41/1916
Adhesion to PETG	7.0	kN/m	Renault D41/1916

Injection	Nominal Value	Unit
Drying Temperature	60.0 to 80.0	°C
Drying Time	2.0 to 4.0	hr
Rear Temperature	180	°C
Middle Temperature	210	°C
Front Temperature	240	°C
Mold Temperature	40.0 to 60.0	°C
Injection Pressure	20.0 to 100	MPa
Back Pressure	2.00 to 10.0	MPa

Note Message
1 .	Type S2, 200 mm/min
2 .	Type S2, 200 mm/min
3 .	Method Bb, Angle (Nicked)
4 .	Method A

Resin Grade	Manufacturer	Category	Trademark
PONACOM ABS 7410-12	Ponachem Compound GmbH	ABS	PONACOM ABS
PRIMALLOY® A1700	Mitsubishi Chemical Performance Polymers, Inc.	TPE	PRIMALLOY®
Reny® 2686	Mitsubishi Engineering-Plastics Corp	PARA	Reny®
CGPC PVC R-10X MI Bottle Blowing	China General Plastics Corporation	PVC, Flexible	CGPC PVC
Evolue™ SP2530S	Prime Polymer Co., Ltd.	LLDPE	Evolue™