Order Products : sales@su-jiao.com

ISPLEN® PB 180 G2M

Category:	PP Impact Copolymer , Polypropylene Impact Copolymer
Manufacturer:	REPSOL
Trademark:	ISPLEN®
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	0Sg08F_ISPLEN-PB-180-G2M.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
ISPLEN® PB 180 G2M is a high fluidity heterophasic copolymer characterised by its excellent flow properties and by its good balance of mechanical properties: impact strength and stiffness. It is particularly suitable for injection moulding applications of thin walled articles. The material also shows very low tendency to warp and it is used in goods where dimensional stability is important. TYPICAL APPLICATIONS The particular characteristics of ISPLEN® PB 180 G2M permit a grade intended for use in applications where good proccesability is appreciated in addition with good mechanical properties: Domestic and leisure furniture. Square boxes and round storage containers for consumer appliances. Trays and containers for cold storage of foodstuffs: ice creams, fresh vegetables, fruit processed... Industrial components: toys, sports, leisure, automotive, storage organizers, packaging... Recommended melt temperature range from 190 to 250°C. Processing conditions should be optimised for each production line.

Message

ISPLEN® PB 180 G2M is a high fluidity heterophasic copolymer characterised by its excellent flow properties and by its good balance of mechanical properties: impact strength and stiffness. It is particularly suitable for injection moulding applications of thin walled articles. The material also shows very low tendency to warp and it is used in goods where dimensional stability is important.

TYPICAL APPLICATIONS
The particular characteristics of ISPLEN® PB 180 G2M permit a grade intended for use in applications where good proccesability is appreciated in addition with good mechanical properties:

Domestic and leisure furniture.

Square boxes and round storage containers for consumer appliances.

Trays and containers for cold storage of foodstuffs: ice creams, fresh vegetables, fruit processed...

Industrial components: toys, sports, leisure, automotive, storage organizers, packaging...

Recommended melt temperature range from 190 to 250°C. Processing conditions should be optimised for each production line.

General Information
Features	Food Contact Acceptable Good Dimensional Stability Good Impact Resistance Good Processability Good Stiffness High Flow Low Warpage
Uses	Automotive Applications Containers Food Containers Furniture Industrial Applications Packaging Sporting Goods Thin-walled Parts Toys
Agency Ratings	EU Food Contact, Unspecified Rating
Processing Method	Injection Molding

Physical	Nominal Value	Unit	Test Method
Density	0.905	g/cm³	ISO 1183
Melt Mass-Flow Rate (MFR) (230°C/2.16 kg)	20	g/10 min	ISO 1133

Hardness	Nominal Value	Unit	Test Method
Shore Hardness (Shore D)	62		ISO 868

Mechanical	Nominal Value	Unit	Test Method
Flexural Modulus	1250	MPa	ISO 178

Impact	Nominal Value	Unit	Test Method
Charpy Notched Impact Strength (23°C)	6.0	kJ/m²	ISO 179

Thermal	Nominal Value	Unit	Test Method
Heat Deflection Temperature (0.45 MPa, Unannealed)	88.0	°C	ISO 75-2/B

Injection	Nominal Value	Unit
Processing (Melt) Temp	190 to 250	°C

Resin Grade	Manufacturer	Category	Trademark
SABIC® PP 86MF97	Saudi Basic Industries Corporation (SABIC)	PP Impact Copolymer	SABIC® PP
DENILUB B 00U 1Si	Vamp Tech	PBT	DENILUB
Enviramid® N1300STHL BK	Ravago Manufacturing Americas, LLC	Nylon 66	Enviramid®
Hifax CA 721 GW	LyondellBasell Industries	PP, Unspecified	Hifax
O'Tech OM 7036	O'Tech Corporation	PVC, Unspecified	O'Tech