Order Products : sales@su-jiao.com

KRATON® D1116 A

Category:	SBS , Styrene Butadiene Styrene Block Copolymer
Manufacturer:	Kraton Polymers LLC
Trademark:	KRATON®
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	0Plq7V_KRATON-D1116-A.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
Kraton D1116 A is a clear, radial triblock copolymer based on styrene and butadiene with a polystyrene content of 23%. It is supplied from Europe in the physical form identified below. Kraton D1116 AT - supplied as a porous pellet dusted with talc Kraton D1116 ASM - supplied as a powder dusted with silica Kraton D1116 A IM - supplied as a powder dusted with inorganic dusting agents for supply to the North American market Kraton D1116 A is used as a modifier of bitumen and polymers. It is also suitable as an ingredient in formulating compounds forfootwear applications and may be used in formulating adhesives, sealants, and coatings.

Message

Kraton D1116 A is a clear, radial triblock copolymer based on styrene and butadiene with a polystyrene content of 23%. It is supplied from Europe in the physical form identified below.

Kraton D1116 AT - supplied as a porous pellet dusted with talc

Kraton D1116 ASM - supplied as a powder dusted with silica

Kraton D1116 A IM - supplied as a powder dusted with inorganic dusting agents for supply to the North American market

Kraton D1116 A is used as a modifier of bitumen and polymers. It is also suitable as an ingredient in formulating compounds forfootwear applications and may be used in formulating adhesives, sealants, and coatings.

General Information
Additive	Antioxidant
Features	Antioxidant Block Copolymer
Uses	Adhesives Asphalt Modification Coating Applications Compounding Footwear Plastics Modification Sealants
Appearance	Clear/Transparent
Forms	Pellets Powder

Physical	Nominal Value	Unit	Test Method
Density	0.940	g/cm³	ISO 2781
Solution Viscosity ¹	2000 to 3000	mPa·s	Internal Method
Antioxidant Additive	> 0.14	%	Internal Method
Ash Content
AIM	2.5 to 4.5	%	Internal Method
ASM	2.5 to 5.0	%	ISO 247
AT	< 0.35	%	ISO 247
Polystyrene Content	22 to 24	%	Internal Method
Total Extractables	< 1.0	%	Internal Method
Volatile Matter	< 0.30	%	Internal Method

Note Message
1 .	20.0%w Toluene, 25°C

Resin Grade	Manufacturer	Category	Trademark
NEFTEKHIM PP 8340N (EPF31HR)	Nizhnekamskneftekhim Inc.	PP Copolymer	NEFTEKHIM PP
HiFill® PBT GF33 IM	Techmer Engineered Solutions	PBT	HiFill®
Pebax® 2533 SN 01	Arkema	PEBA-Ether	Pebax®
Sylvin 6239-85UV Grey 9590	Sylvin Technologies Incorporated	PVC, Unspecified	Sylvin
LNP™ THERMOCOMP™ NF004 compound	SABIC Innovative Plastics	PC+ABS	LNP™ THERMOCOMP™