Order Products : sales@su-jiao.com

MERICAN® -11C

Category:	Vinyl Ester , Vinyl Ester
Manufacturer:	Huachang Polymer Co., Ltd.
Trademark:	MERICAN®
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	0NavFI_MERICAN--11C.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

WECHAT

Message

Vinyl Ester Resin for Electrowinning Cell

MERICAN-11C is a corrosion resistant epoxy vinyl ester resin with high molecular weight. It is suitable for making monolithic polymer concrete electrowinning cells.

PROPERTY

Good wet-out with fillers and glass fiber

Air drying; Smooth and dense surface, good impermeability

Excellent mechanical properties and heat resistance

Low peak exothermic; Thick parts do not crack

Low profile, good flexibility and strong adhesion

APPLICATION

Suitable for making polymer concrete, especially for monolithic electrowinning cells in copper, zinc, nickel, cobalt and other non-ferrous hydrometallurgy industry.

Suitable for vacuum infusion process.

General Information
Features	Alkali Resistant Good Adhesion Good Chemical Resistance Good Corrosion Resistance Good Crack Resistance Good Flexibility High Heat Resistance High Molecular Weight Low Exotherm Rapid Wetting
Uses	Electrical/Electronic Applications
Appearance	Yellow
Processing Method	Vacuum Forming

Physical	Nominal Value	Unit	Test Method
Acid Value	4.00 to 12.00	mg KOH/g
Solids Content	52 to 58	%

Thermoset	Nominal Value	Unit
Gel Time
25°C ¹	34.0 to 62.0	min
25°C ²	109.0 to 201.0	min

Additional Information	Nominal Value	Unit
Gel to Peak
-- ³	1.7 to 2.5	hr
-- ⁴	0.3 to 0.5	hr
Peak Exotherm
-- ⁵	60 to 80	°C
-- ⁶	100 to 120	°C

Hardness	Nominal Value	Unit	Test Method
Barcol Hardness	45 to 50		ASTM D2583

Mechanical	Nominal Value	Unit	Test Method
Tensile Modulus	3200 to 4200	MPa	ASTM D638
Tensile Strength	80.0 to 95.0	MPa	ASTM D638
Tensile Elongation (Break)	4.0 to 5.0	%	ASTM D638
Flexural Modulus	3400 to 4000	MPa	ASTM D790
Flexural Strength	120 to 160	MPa	ASTM D790
Compressive Strength	110 to 130	MPa	ASTM D695

Thermal	Nominal Value	Unit	Test Method
Deflection Temperature Under Load (1.8 MPa, Unannealed)	95.0 to 105	°C	ASTM D648

Thermoset	Nominal Value	Unit
Thermoset Mix Viscosity (25°C)	150 to 250	cP

Note Message
1 .	1.5%Butanox M-50, 1.5%NL-49P (AkzoNobel)
2 .	1.0%Butanox M-50, 1.0%NL-49P (AkzoNobel)
3 .	1.0%Butanox M-50, 1.0%NL-49P (AkzoNobel)
4 .	1.5%Butanox M-50, 1.5%NL-49P (AkzoNobel)
5 .	1.0%Butanox M-50, 1.0%NL-49P (AkzoNobel)
6 .	1.5%Butanox M-50, 1.5%NL-49P (AkzoNobel)

Resin Grade	Manufacturer	Category	Trademark
Shinko-Lac® ASA S210	Mitsubishi Rayon America Inc.	ASA	Shinko-Lac®
Moplen HP740H	LyondellBasell Industries	PP Homopolymer	Moplen
Akulon® F150-CZ	DSM Engineering Plastics	Nylon 6	Akulon®
PLUSTEK PB350M8	Polyram Ram-On Industries	Nylon 6	PLUSTEK
Sylvin 3220-70 Natural	Sylvin Technologies Incorporated	PVC, Unspecified	Sylvin