Order Products : sales@su-jiao.com
Veradel® LTG-3301
| Category: | PESU , Polyethersulfone |
| Manufacturer: | Solvay Specialty Polymers |
| Trademark: | Veradel® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 0IcIed_VeradelLTG3301.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Veradel® LTG-3301 polyethersulfone (PESU) offers the ability to directly metalize high-quality reflective surfaces for applications that require high heat deflection, excellent toughness and dimensional stability. Other desirable properties include thermal stability, creep resistance, and low moisture absorption. The resin exhibits superior flow when injection molded. Potential applications include automotive headlamp reflectors, fog lamp reflectors, park and turn reflectors, and other applications where excellent surface finish for direct metallization is desired. Veradel® LTG-3301 resin is available in a variety of colors.
|
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| RoHS Compliance |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | |||
| -- | 1.37 | g/cm³ | ASTM D792 |
| 23°C | 1.37 | g/cm³ | ISO 1183 |
| Melt Mass-Flow Rate (MFR) (380°C/2.16 kg) | 30 | g/10 min | ASTM D1238, ISO 1133 |
| Molding Shrinkage - Flow | 0.60 | % | ASTM D955 |
| Water Absorption (24 hr) | 0.54 | % | ASTM D570 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus | |||
| -- | 2650 | MPa | ASTM D638 |
| 23°C, 4.00 mm 1 | 2800 | MPa | ISO 527-2 |
| Tensile Stress | |||
| Yield, 23°C, 4.00mm 2 | 88.0 | MPa | ISO 527 |
| -- | 82.7 | MPa | ASTM D638 |
| Tensile Elongation | |||
| Yield | 6.5 | % | ASTM D638 |
| Yield 3 | 6.7 | % | ISO 527 |
| Flexural Modulus | |||
| -- | 2900 | MPa | ASTM D790 |
| -- | 2750 | MPa | ISO 178 |
| Flexural Strength | 111 | MPa | ASTM D790, ISO 178 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Charpy Notched Impact Strength | 7.7 | kJ/m² | ISO 179/1eA |
| Charpy Unnotched Impact Strength | No Break | ISO 179/1eU | |
| Notched Izod Impact | |||
| -- | 85 | J/m | ASTM D256 |
| -- | 6.4 | kJ/m² | ISO 180/A |
| Unnotched Izod Impact Strength | No Break | ISO 180 | |
| Tensile Impact Strength | 336 | kJ/m² | ASTM D1822 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load | |||
| 1.8 MPa, not annealed | 204 | °C | ASTM D648 |
| 1.8 MPa, annealing, 4.00mm 4 | 213 | °C | ISO 75-2/A |
| Vicat Softening Temperature | 217 | °C | ISO 306 5 |
| CLTE - Flow | 4.9E-5 | cm/cm/°C | ASTM D696 |
| RTI Elec (0.79 mm) | 180 | °C | UL 746 |
| RTI Imp (1.6 mm) | 180 | °C | UL 746 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Volume Resistivity | 1.7E+15 | ohms·cm | ASTM D257 |
| Dielectric Strength | 15 | kV/mm | ASTM D149 |
| Dielectric Constant | ASTM D150 | ||
| 60 Hz | 3.51 | ASTM D150 | |
| 1 kHz | 3.50 | ASTM D150 | |
| 1 MHz | 3.54 | ASTM D150 | |
| Dissipation Factor | ASTM D150 | ||
| 60 Hz | 1.7E-3 | ASTM D150 | |
| 1 kHz | 2.2E-3 | ASTM D150 | |
| 1 MHz | 5.6E-3 | ASTM D150 |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Flame Rating (0.75 mm) | V-0 | UL 94 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 177 | °C | |
| Drying Time | 2.5 | hr | |
| Processing (Melt) Temp | 343 - 385 | °C | |
| Mold Temperature | 138 - 163 | °C | |
| Injection Rate | Fast | ||
| Screw Compression Ratio | 2.2:1.0 |
| Note Message | |
|---|---|
| 1 . | 1 mm/min |
| 2 . | 50 mm/min |
| 3 . | 50 mm/min |
| 4 . | annealed 1 hour at 200°C |
| 5 . | 50°C/h, A (10N) |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| S&E Battery GPP1005M-EXLT Natural | S&E Specialty Polymers, LLC | TPO | S&E Battery |
| Sinvicomp SIM5029R | Teknor Apex Asia Pacific PTE. LTD. | PVC, Flexible | Sinvicomp |
| BESTNYL SI30VI02BWX | Triesa Plastics | Nylon 6 | BESTNYL |
| Cheng Yu FV3035 | Cheng Yu Plastic Company Limited | Acetal (POM) Homopolymer | Cheng Yu |
| Lutene® H BE0400 | LG Chem Ltd. | HDPE | Lutene® H |
