Order Products : sales@su-jiao.com
Quadrant EPP Sanalite® HDPE
| Category: | HDPE , High Density Polyethylene |
| Manufacturer: | Quadrant Engineering Plastic Products |
| Trademark: | Quadrant EPP |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 0IRemN_Quadrant-EPP-Sanalite-HDPE.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Quadrant EPP Sanalite® HDPE is a High Density Polyethylene product. It is available in North America. Applications of Quadrant EPP Sanalite® HDPE include food contact applications and kitchenware. Characteristics include:
|
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 0.960 | g/cm³ | ASTM D792 |
| Water Absorption | ASTM D570 | ||
| 24 hr | < 0.010 | % | |
| Saturation | < 0.010 | % |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D) | 70 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus | 1380 | MPa | ASTM D638 |
| Tensile Strength (Ultimate) | 31.7 | MPa | ASTM D638 |
| Tensile Elongation (Break) | 400 | % | ASTM D638 |
| Flexural Modulus | 1200 | MPa | ASTM D790 |
| Flexural Strength (Yield) | 31.7 | MPa | ASTM D790 |
| Compressive Modulus | 689 | MPa | ASTM D695 |
| Compressive Strength (10% Strain, 23°C) | 31.7 | MPa | ASTM D695 |
| Coefficient of Friction (vs. Steel - Static) | 0.20 | Internal Method |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact | 69 | J/m | ASTM D256A |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (1.8 MPa, Unannealed) | 80.0 | °C | ASTM D648 |
| Maximum Use Temperature - Long Term, Air | 82 | °C | |
| Peak Crystallization Temperature (DSC) | 127 | °C | ASTM D3418 |
| CLTE - Flow 1(-40 to 149°C) | 1.1E-4 | cm/cm/°C | ASTM E831 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Surface Resistivity | > 1.0E+15 | ohms | ASTM D257 |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Flame Rating (3.18 mm, Estimated Rating) | HB | UL 94 |
| Note Message | |
|---|---|
| 1 . | 68°F |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| TEREZ PPA 7500 GF 50 H | TER HELL PLASTIC GMBH | PPA | TEREZ PPA |
| Witcom PPS 6C/3L3-L | Witcom Engineering Plastics B.V. | PPS, Linear | Witcom PPS |
| Norfor® 130 GF/30-V0 GRIGIO 7110 | SO.F.TER. SPA | PPE | Norfor® |
| BRALEN® FB 2-17 | Slovnaft Petrochemicals, s.r.o. | LDPE | BRALEN® |
| Escorene™ Ultra UL 00728EL | ExxonMobil Chemical | EVA | Escorene™ Ultra |
