Order Products : sales@su-jiao.com
Lupolen 4021 K RM
| Category: | MDPE , Medium Density Polyethylene |
| Manufacturer: | LyondellBasell Industries |
| Trademark: | Lupolen |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 0HZgqR_Lupolen-4021-K-RM.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Lupolen 4021 K RM is a new generation hexene linear medium-density polyethylene for rotomolding. Typical customer applications include large tanks including agricultural and chemical storage containers and underground and infrastructure applications. Lupolen 4021 K RM is a fully UV-stabilized and pelletized polymer. Tests have shown that this material is resisting against the harmful effect of biodiesel fuel.** It is not intended for use in medical and pharmaceutical applications. ** Resistance is based on our latest patented technology |
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Uses |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.940 | g/cm³ | ISO 1183 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 4.0 | g/10 min | ISO 1133 |
| Environmental Stress-Cracking Resistance | > 1000 | hr | ASTM D1693B |
| Full Notch Creep Test 1(50°C) | 2.1 | day | ISO 16770 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus | 750 | MPa | ISO 527-2 |
| Tensile Stress (Yield) | 19.0 | MPa | ISO 527-2 |
| Tensile Strain (Yield) | 9.0 | % | ISO 527-2 |
| Films | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Elongation (Break) | > 450 | % | ISO 527-3 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Impact Strength | ISO 8256/1A | ||
| -30°C | 120 | kJ/m² | ISO 8256/1A |
| 23°C | 265 | kJ/m² | ISO 8256/1A |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Vicat Softening Temperature | 114 | °C | ISO 306/A50 |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Melt Temperature | 180 - 210 | °C |
| Extrusion instructions |
|---|
| Processing: Recommended range for PIAT (Peak Internal Air Temperature) is 180 - 210 "C. PIAT should not exceed 225 °C. |
| Note Message | |
|---|---|
| 1 . | 6.0 MPa, 2% Arkopal N100 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| SILVER® VUL105-W40K/CXTW-48P | Guangdong Silver Age Sci & Tech. Co., Ltd | PVC, Unspecified | SILVER® |
| T-Blend® 4404N-PE | TSRC Corporation | TPE | T-Blend® |
| Koylene ADL AM018N | Reliance Industries Limited | PP Homopolymer | Koylene ADL |
| Isocor™ 4011 | Shakespeare Monofilaments and Specialty Polymers | Nylon 6/69 | Isocor™ |
| OmniCarb™ PCGF20 | OMNI Plastics, LLC | PC | OmniCarb™ |
