Order Products : sales@su-jiao.com
MARPOL® LL6F 801-B
| Category: | LLDPE , Linear Low Density Polyethylene |
| Manufacturer: | Marco Polo International, Inc. |
| Trademark: | MARPOL® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 0GNgGa_MARPOLLL6F801B.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Recommended Applications: Films |
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Uses |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 0.920 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 1.0 | g/10 min | ASTM D1238 |
| Films | Nominal Value | Unit | Test Method |
|---|---|---|---|
| secant modulus | ASTM D882 | ||
| 1% secant, MD | 170 | MPa | ASTM D882 |
| 1% secant, TD | 200 | MPa | ASTM D882 |
| Tensile Strength | ASTM D882 | ||
| MD : Yield | 10.0 | MPa | ASTM D882 |
| TD : Yield | 11.0 | MPa | ASTM D882 |
| MD : Fracture | 44.1 | MPa | ASTM D882 |
| TD : Fracture | 37.9 | MPa | ASTM D882 |
| Tensile Elongation | ASTM D882 | ||
| MD : Fracture | 540 | % | ASTM D882 |
| TD : Fracture | 820 | % | ASTM D882 |
| Dart Drop Impact | 230 | g | ASTM D1709A |
| Elmendorf Tear Strength | ASTM D1922 | ||
| MD | 410 | g | ASTM D1922 |
| TD | 650 | g | ASTM D1922 |
| Optical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Gloss (45°) | 50 | ASTM D2457 | |
| Haze | 12 | % | ASTM D1003 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Radilon® S 40HS 100 E NAT | Radici Plastics | Nylon 6 | Radilon® |
| Absolac® 150 | Styrolution | ABS | Absolac® |
| BONDYRAM® 7107 | Polyram Ram-On Industries | Nylon, Unspecified | BONDYRAM® |
| Epoxies, Ect. 20-3035 (Cat.30) | Epoxies, Etc. | Epoxy | Epoxies, Ect. |
| OTECH ALLOY XLO9141 - Riser Jacket | OTECH Corporation | TP, Unspecified | OTECH ALLOY |
