Order Products : sales@su-jiao.com
OKITEN® 245 S
| Category: | LDPE , Low Density Polyethylene |
| Manufacturer: | DIOKI d.d. |
| Trademark: | OKITEN® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 0EatGG_OKITEN-245-S.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
OKITEN® 245 S is low density polyethylene intended for extrusion of thin blown film having high slip properties. OKITEN® 245 S is characterized by excellent processability and thermal stability; the extruded film exhibits high transparency and very good mechanical properties. OKITEN® 245 S. is extruded in temperature range of 145°C to 170°C. Recommended film thickness: 0.025 mm to 0.060mm. |
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.924 | g/cm³ | ISO 1183 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 2.3 | g/10 min | ISO 1133 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Shore Hardness (Shore D) | 47 | ISO 868 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress | ISO 527-2 | ||
| Yield | 11.0 | MPa | |
| Break | 14.0 | MPa | |
| Tensile Strain (Break) | 540 | % | ISO 527-2 |
| Coefficient of Friction | ISO 8295 | ||
| vs. Itself - Dynamic | < 0.11 | ||
| vs. Itself - Static | < 0.11 |
| Films | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Film Thickness - Tested | 25 | µm | |
| Film Thickness - Recommended / Available | 0.025 mm to 0.060 mm |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Vicat Softening Temperature | 94.0 | °C | ISO 306/A |
| Melting Temperature | 114 | °C | ISO 11357-3 |
| Optical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Haze (25.0 µm) | 4.0 | % | ISO 14782 |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Melt Temperature | 145 to 170 | °C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Starflam BFR200Y | Eurostar Engineering Plastics | Nylon 6 | Starflam |
| Delta N66R-1G100 | Delta Polymers | Nylon 66 | Delta |
| GELOY™ CR7500 resin | SABIC Innovative Plastics | ASA | GELOY™ |
| Elastron® TPO T401.D51.N | Elastron USA, Inc. | TPO (POE) | Elastron® TPO |
| Hyundai EP PA66 LD430 | HYUNDAI EP Co., Ltd. | Nylon 66 | Hyundai EP PA66 |
