Order Products : sales@su-jiao.com

EnDura® Z95X

Category:	NBR , Acrylonitrile Butadiene Rubber
Manufacturer:	Precision Polymer Engineering Ltd.
Trademark:	EnDura®
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	0Co1G3_EnDura-Z95X.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
Z95X is a peroxide-cured, explosive decompression resistant HNBR compound. Z95X provides good chemical resistance to sour gas (H2S), crude oil, lubricating agents, and oil additives, with superior resistance to carbon dioxide, water, drilling mud and amine corrosion inhibitors. The EnDura® range of elite materials has been specifically developed for Explosive Decompression (ED) resistance in downhole, surface and subsea oilfield equipment. The high mechanical strength and abrasion resistance of Z95X makes it particularly suitable for dynamic applications. Key Attributes Excellent Explosive Decompression resistance Tested to NORSOK M-710 standard Tested to NACE TM0187 (Sour Gas) standard Improved resistance to weather and heat than standard nitrile grades Good chemical resistance especially to oil and fuel High mechanical strength Typical Applications Low temperature and high pressure environments Exploration and drilling equipment Cementing and completion equipment Subsea valves and pumps Blow-out preventers (BOPs) Mud motors Rotary lip seals

Message

Z95X is a peroxide-cured, explosive decompression resistant HNBR compound.

Z95X provides good chemical resistance to sour gas (H2S), crude oil, lubricating agents, and oil additives, with superior resistance to carbon dioxide, water, drilling mud and amine corrosion inhibitors.

The EnDura® range of elite materials has been specifically developed for Explosive Decompression (ED) resistance in downhole, surface and subsea oilfield equipment.

The high mechanical strength and abrasion resistance of Z95X makes it particularly suitable for dynamic applications.

Key Attributes

Excellent Explosive Decompression resistance

Tested to NORSOK M-710 standard

Tested to NACE TM0187 (Sour Gas) standard

Improved resistance to weather and heat than standard nitrile grades

Good chemical resistance especially to oil and fuel

High mechanical strength

Typical Applications

Low temperature and high pressure environments

Exploration and drilling equipment

Cementing and completion equipment

Subsea valves and pumps

Blow-out preventers (BOPs)

Mud motors

Rotary lip seals

General Information
Features	High strength Good chemical resistance Fuel resistance Oil resistance Low or no water absorption
Uses	Pump parts Ship application Low temperature application Valve/valve components Oil/Gas Supplies
Appearance	Black

Hardness	Nominal Value		Test Method
IRHD Hardness	89		ASTM D1415, ISO 48

Elastomers	Nominal Value	Unit	Test Method
Tensile Stress
50% strain	10.0	MPa	ASTM D412
100% strain	18.0	MPa	ASTM D412, ISO 37
Tensile Strength (Yield)	32.1	MPa	ASTM D412, ISO 37
Tensile Elongation (Break)	260	%	ASTM D412, ISO 37
Compression Set (150°C, 24 hr)	20	%	ASTM D395, ISO 815

Aging	Nominal Value	Unit	Test Method
Change in Tensile Strength in Air (150°C, 70 hr)	3.5	%	ASTM D412, ISO 37
Change in Ultimate Elongation in Air (150°C, 70 hr)	3.5	%	ASTM D412, ISO 37
Change in IRHD Hardness in Air (150°C, 70 hr)	2.0		ASTM D573, ISO 188

Thermal	Nominal Value	Unit
Maximum Operating Temperature	180	°C

Additional Information
Minimum Operating Temperature: -25°C (-13°F)

Resin Grade	Manufacturer	Category	Trademark
TechnoFin MA 80	TechnoCompound GmbH	PP, Unspecified	TechnoFin
Bayfit® SA513 (95 Index)	Covestro - PUR	PUR, Unspecified	Bayfit®
EverGlide® MB5411	Polymer Dynamix	PE, Unspecified	EverGlide®
Hanwha Total PP BJ352	HANWHA TOTAL PETROCHEMICALS Co., Ltd.	PP Impact Copolymer	Hanwha Total PP
OTECH PVC OW938LT-UL Approved	OTECH Corporation	PVC, Unspecified	OTECH PVC