Order Products : sales@su-jiao.com
Thermx® LED 0201S
| Category: | PCT , Polycyclohexylenedimethylene Terephthalate |
| Manufacturer: | Celanese Corporation |
| Trademark: | Thermx® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 0C2LAo_Thermx-LED-0201S.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Thermx LED 0201 is a super white reinforced PCT resin highly suitable for LED applications. The material exhibits high heat resistance, high reflectance stability, high thermal stability, low moisture absorption, and high mechanical properties for injection molding. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| RoHS Compliance |
|
| Appearance |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 1.62 | g/cm³ | ISO 1183 |
| Molding Shrinkage | ISO 294-4 | ||
| Vertical flow direction | 0.90 | % | ISO 294-4 |
| Flow direction | 0.30 | % | ISO 294-4 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus | 6270 | MPa | ISO 527-2/1A/1 |
| Tensile Stress (Break) | 73.0 | MPa | ISO 527-2/1A/5 |
| Tensile Strain (Break) | 1.7 | % | ISO 527-2/1A/5 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Charpy Notched Impact Strength (23°C) | 3.2 | kJ/m² | ISO 179/1eA |
| Charpy Unnotched Impact Strength (23°C) | 32 | kJ/m² | ISO 179/1eU |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Melting Temperature 1 | 285 | °C | ISO 11357-3 |
| Linear thermal expansion coefficient | ISO 11359-2 | ||
| Flow | 3.2E-5 | cm/cm/°C | ISO 11359-2 |
| Lateral | 1.0E-4 | cm/cm/°C | ISO 11359-2 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 95.0 - 100 | °C | |
| Drying Time | 4.0 - 6.0 | hr | |
| Suggested Max Moisture | 0.030 | % | |
| Rear Temperature | 290 - 305 | °C | |
| Middle Temperature | 285 - 300 | °C | |
| Front Temperature | 285 - 300 | °C | |
| Nozzle Temperature | 285 - 295 | °C | |
| Processing (Melt) Temp | 290 - 310 | °C | |
| Mold Temperature | 100 - 150 | °C |
| Injection instructions |
|---|
| Zone 4 Temperature: 285 to 300°C |
| Note Message | |
|---|---|
| 1 . | 10°C/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Thermoset Plastics 100 | Thermoset, Lord Chemical Products | Epoxy | Thermoset Plastics |
| YUZEX® 7301 | SK Global Chemical | HDPE | YUZEX® |
| Ferro PP LPP26BC54UL-NA | Ferro Corporation | PP, Unspecified | Ferro PP |
| ENFLEX VU-424-55A | Ravago Group | PP+EPDM | ENFLEX |
| PENTAMID A GV15 H RC black | PENTAC Polymer GmbH | Nylon 66 | PENTAMID A |
