| Processing
Hyflon® XPH 5510_1N is processed according to methods generally used for conventional impregnation technology. Generally the procedure involves dip-coating and then heating to remove water and surfactant from the impregnated item. Depending on the application, sintering above the melting point of the coated resin may be carried out to obtain the finished coated articles.
Hyflon® XPH 5510_1N can be processed neat or appropriately formulated. Also, it can be used diluted using distilled or deionized water. Formulation, line speed and oven temperature must all be well controlled for optimized features of the coated substrates.
Storage and Handling
Hyflon® MFA® dispersions must be stored under suitable temperature conditions to ensure prolonged stability. Temperatures lower than 5°C must be avoided to prevent irreversible settling. Also, some settling may occur on prolonged standing and/or heat exposure. It is therefore strongly recommended that the product is always kept at temperatures below 35°C. The optimum storage temperature range is 10 - 25°C. It is also advisable that the product is homogenized by gentle rolling or stirring once per month and prior to use.
Prolonged exposure of the liquid to air could lead to some coagulation at the surface due to water evaporation. For this reason and also to avoid contamination, it is recommended to keep the containers closed when not in use.
Safety and Toxicology
Before using Hyflon® MFA® dispersions consult the product Material Safety Data Sheet and follow all label directions and handling precautions.
As with all PTFE materials, handling and processing should only be carried out in well ventilated areas. Venting units should be installed above processing equipment. Fumes must not be inhaled and eye and skin contact ought to be avoided. In case of skin contact wash with soap and water. In case of eye contact flush with water immediately and seek medical help. Do not smoke in areas contaminated with powder, vapour or fumes. See Material Safety Data Sheet for detailed advice on waste disposal methods.
Packaging
Hyflon® XPH 5510_1N is packaged in either 25 kg drums or 1300 kg IBC's. |
