Order Products : sales@su-jiao.com
Silplus® 80 HS
| Category: | Silicone Rubber, HTV , Silicone Rubber, HTV |
| Manufacturer: | Momentive Performance Materials Inc. |
| Trademark: | Silplus® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 0ADS6P_Silplus-80-HS.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Silplus 80 HS is a heat cured elastomer with very good mechanical and processing properties. Silplus 80 HS when properly compounded and catalyzed can be considered for use in a wide variety of applications such as extrusion, molding and calendaring. Key Features and Benefits
Potential Applications Because of its outstanding proerties, Silplus 80 HS heat cured silicone is an excellent candidate to consider for use in most types of molding, extrusion and calendaring applications. |
| General Information | |
|---|---|
| Features |
|
| Agency Ratings |
|
| Appearance |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Mooney Viscosity (25°C) | 60 | MU | DIN 53523 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A) | 80 | DIN 53505 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength | 11.0 | MPa | DIN 53504 |
| Tensile Elongation (Break) | 450 | % | DIN 53504 |
| Tear Strength 1 | 45.0 | kN/m | ASTM D624 |
| Compression Set (175°C, 22 hr) | 20 | % | ISO 815 |
| Thermoset | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Post Cure Time (200°C) | 4.0 | hr |
| Additional Information | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Vulcanization (170°C) | 10.0 | min | |
| 100 (pbw) Silplus 80 HS with 0.25 (pbw) like 2,5-Dimethyl-2,5-di(tert.butylperoxy)hexane (100%). |
| Uncured Properties | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 1.20 | g/cm³ | DIN 53479 |
| Note Message | |
|---|---|
| 1 . | B mould |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Shinite® PET T102G30 | Shinkong Synthetic Fiber Corp. | PET | Shinite® PET |
| TYNAB® GL85 | Tyne Plastics LLC. | ABS | TYNAB® |
| Utomer UT886 | Shanghai Utomer Material Science Co., Ltd. | TPU-Polyether | Utomer |
| Elastron® TPO T100.D60.B | Elastron USA, Inc. | TPO (POE) | Elastron® TPO |
| Iupilon® GSH2010KR | Mitsubishi Engineering-Plastics Corp | PC | Iupilon® |
