Order Products : sales@su-jiao.com
CoolPoly® E4507
| Category: | PC , Polycarbonate |
| Manufacturer: | Cool Polymers, Inc. |
| Trademark: | CoolPoly® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 06XMGb_CoolPoly-E4507.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| CoolPoly E series of thermally conductive plastics transfers heat, a characteristic previously unavailable in injection molding grade polymers. CoolPoly is lightweight, netshape moldable and allows design freedom in applications previously restricted to metals. The E series is electrically conductive and provides inherent EMI/RFI shielding charactersitics. |
| General Information | |
|---|---|
| Features |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 1.32 | g/cm³ | ISO 1183 |
| Molding Shrinkage | ASTM D955 | ||
| Flow | 0.30 | % | ASTM D955 |
| Transverse flow | 0.40 | % | ASTM D955 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus | 4340 | MPa | ISO 527-2 |
| Tensile Stress (Yield) | 40.0 | MPa | ISO 527-2 |
| Nominal Tensile Strain at Break | 1.4 | % | ISO 527-2 |
| Flexural Modulus | 4600 | MPa | ISO 178 |
| Flexural Stress | 73.0 | MPa | ISO 178 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Charpy Notched Impact Strength | 3.3 | kJ/m² | ISO 179 |
| Charpy Unnotched Impact Strength | 13 | kJ/m² | ISO 179 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Heat | 1260 | J/kg/°C | ASTM C351 |
| Thermal Conductivity | 3.6 | W/m/K | ASTM C177 |
| Flammability | Nominal Value | Test Method | |
|---|---|---|---|
| Flame Rating (2.00 mm) | V-0 | UL 94 |
| Additional Information |
|---|
| The value listed as Thermal Conductivity, ASTM C177, was tested in accordance with ASTM E1461.The value listed as Mold Shrinkage, ASTM D955, was tested in accordance with ASTM D551.The value listed as Specific Heat ASTM C351, was tested in accordance with ASTM E1461.Thermal Diffusivity, ASTM E1461: 0.022 cm²/sec |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 105 | °C | |
| Drying Time | 4.0 | hr | |
| Dew Point | -30.0 | °C | |
| Rear Temperature | 280 - 290 | °C | |
| Middle Temperature | 290 - 300 | °C | |
| Front Temperature | 295 - 310 | °C | |
| Processing (Melt) Temp | 295 - 310 | °C | |
| Mold Temperature | 70.0 - 95.0 | °C | |
| Injection Pressure | 75.0 - 150 | MPa | |
| Injection Rate | Moderate-Fast | ||
| Holding Pressure | 55.0 - 100 | MPa | |
| Back Pressure | 0.100 - 0.400 | MPa | |
| Screw Speed | 100 - 150 | rpm | |
| Screw Compression Ratio | 2.0:1.0 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Radilon® BGV 40 Black | Radici Plastics | Nylon 6 | Radilon® |
| Xuchuan XCW-6102M | Xuchuan Chemical (Suzhou) Co., Ltd | PUR, Unspecified | Xuchuan |
| 4TECH® 9B22675 | 4Plas | Nylon 6 | 4TECH® |
| Sylvin 8309-65 Natural | Sylvin Technologies Incorporated | PVC, Unspecified | Sylvin |
| Sylvin 83000-75 Black | Sylvin Technologies Incorporated | PVC, Unspecified | Sylvin |
