Order Products : sales@su-jiao.com
Adiprene® BL 16
| Category: | PUR-Ether/TDI , Polyurethane (Polyether, TDI) |
| Manufacturer: | Chemtura |
| Trademark: | Adiprene® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 04PiHN_Adiprene-BL-16.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
ADIPRENE BL-16 is a liquid urethane elastomer with blocked isocyanate curing sites, which can be activated by heating. The blocked curing sites allow protracted storage of the polymer in the presence of moisture and active vulcanizing agents. Diamine-cured ADIPRENE BL-16 yields vulcanizates essentially equivalent to those of ADIPRENE L-167. These products have high tensile strength and excellent oil and abrasion resistance. ADIPRENE BL-16 is well suited as a vehicle for abrasion resistant coatings for fabric and rubber, and for solvent-resistant adhesives. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Appearance |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity 1 | 1.04 to 1.08 | g/cm³ | ASTM D792 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness | ASTM D2240 | ||
| Shore A | 92 | ||
| Shore D | 48 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Taber Abrasion Resistance (1000 Cycles, 1000 g, H-22 Wheel) | 112 | mg |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress | ASTM D412 | ||
| 100% Strain | 11.4 | MPa | |
| 300% Strain | 24.8 | MPa | |
| Tensile Strength | 37.2 | MPa | ASTM D412 |
| Tensile Elongation (Break) | 460 | % | ASTM D412 |
| Aging | Nominal Value | Unit | |
|---|---|---|---|
| Change in Volume | |||
| 50°C, 168 hr, in ASTM Oil #3 | 6.8 | % | |
| 50°C, 168 hr, in Reference Fuel B | 25 | % |
| Thermoset | Nominal Value | Unit | |
|---|---|---|---|
| Thermoset Components | |||
| Hardener | Mix Ratio by Weight: 12 | ||
| Resin | Mix Ratio by Weight: 100 |
| Fill Analysis | Nominal Value | Unit | |
|---|---|---|---|
| Brookfield Viscosity (50°C) | 7.50 to 15.0 | Pa·s |
| Additional Information | Nominal Value | Unit | |
|---|---|---|---|
| Isocyanate Content | |||
| Blocked | 5.3 to 5.8 | % | |
| Free | < 0.25 | % |
| Uncured Properties | Nominal Value | Unit | |
|---|---|---|---|
| Curing Time (130°C) | 1.0 | hr |
| Note Message | |
|---|---|
| 1 . | 25°C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| ALTECH® ABS A 1000/172 UV | ALBIS PLASTIC GmbH | ABS | ALTECH® ABS |
| Clariant ABS ABS4500 | Clariant Corporation | ABS | Clariant ABS |
| Fainplast PVC PHS 80/B | Fainplast Compounds S.r.l | PVC, Flexible | Fainplast PVC |
| INFUSE™ 9100 | The Dow Chemical Company | OBC | INFUSE™ |
| Infino CF-3300LW | LOTTE ADVANCED MATERIALS CO., LTD. | PC | Infino |
