Order Products : sales@su-jiao.com
IROGRAN® A 85 H 4827
| Category: | TPU-Polyester , Thermoplastic Polyurethane Elastomer (Polyester) |
| Manufacturer: | Huntsman Corporation |
| Trademark: | IROGRAN® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 025ia8_IROGRAN-A-85-H-4827.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
IROGRAN A 85 H 4827 is a thermoplastic polyester polyurethane for injection moulding applications. IROGRAN A 85 H 4827 is part of the HUNTSMAN technical injection molding product range and offers a specially designed, flexible material with a broad processing window. PERFORMANCE FEATURES
APPLICATIONS
|
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity 1 | 1.20 | g/cm³ | ASTM D792, DIN 53479 |
| Melt Mass-Flow Rate (MFR) (190°C/21.6 kg) | 20 | g/10 min |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness | ASTM D2240, DIN 53505 | ||
| Shore A, Injection Molded | 86 | ||
| Shore D, Injection Molded | 37 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Abrasion 2 | |||
| -- | 20 | mm³ | DIN 53516 |
| -- | 20 | mm³ | ASTM D395 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress 3 | DIN 53504 | ||
| 100% Strain | 6.00 | MPa | |
| 300% Strain | 14.0 | MPa | |
| Tensile Stress 4(Break) | 50.0 | MPa | DIN 53504 |
| Tensile Elongation 5(Break) | 600 | % | DIN 53504 |
| Tear Strength 6 | 85 | kN/m | ISO 34-1 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | |||
| -- | 85.0 to 90.0 | °C | |
| Hot Air Dryer | 80.0 to 90.0 | °C | |
| Drying Time | |||
| -- | 3.0 | hr | |
| Hot Air Dryer | 3.0 | hr | |
| Dew Point | -30.0 | °C | |
| Rear Temperature | 190 to 200 | °C | |
| Middle Temperature | 195 to 205 | °C | |
| Front Temperature | 200 to 210 | °C | |
| Nozzle Temperature | 185 to 195 | °C | |
| Mold Temperature | 20.0 to 50.0 | °C |
| Note Message | |
|---|---|
| 1 . | Injection Molded |
| 2 . | Injection Molded |
| 3 . | Injection Molded |
| 4 . | Injection Molded |
| 5 . | Injection Molded |
| 6 . | Injection Molded |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Moplen EPC30M | Shazand (Arak) Petrochemical Corporation | PP Copolymer | Moplen |
| Braskem PP TI2600C | Braskem America Inc. | PP, High Crystal | Braskem PP |
| Formolene® 6375N | Formosa Plastics Corporation, U.S.A. | PP Impact Copolymer | Formolene® |
| Laprene® 83E200A35 | SO.F.TER. SPA | SEBS | Laprene® |
| Sylvin 8354-62D Yellow 4193 | Sylvin Technologies Incorporated | PVC, Unspecified | Sylvin |
