Order Products : sales@su-jiao.com
ResMart Ultra CoPP 20-2
| Category: | PP Impact Copolymer , Polypropylene Impact Copolymer |
| Manufacturer: | ResMart |
| Trademark: | ResMart Ultra |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 01s4zk_ResMart-Ultra-CoPP-20-2.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Prime FDA Impact Copolymer Polypropylene that provides a good combination of impact and stifness |
| General Information | |
|---|---|
| Features |
|
| Agency Ratings |
|
| RoHS Compliance |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 0.900 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 20 | g/10 min | ASTM D1238 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength | 23.8 | MPa | ASTM D638 |
| Tensile Elongation (Yield) | 5.1 | % | ASTM D638 |
| Flexural Modulus | 1310 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (3.18 mm) | 110 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (0.45 MPa, Unannealed) | 104 | °C | ASTM D648 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature - Desiccant Dryer | 79.4 | °C | |
| Drying Time - Desiccant Dryer | 2.0 | hr | |
| Processing (Melt) Temp | 191 to 232 | °C | |
| Mold Temperature | 32.2 to 65.6 | °C | |
| Injection Pressure | 68.9 to 103 | MPa |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Aquivion® E87-12S | Solvay Specialty Polymers | PFSA | Aquivion® |
| ETILINAS HD5739UB | POLYETHYLENE MALAYSIA SDN BHD | HDPE | ETILINAS |
| K-Flex 3370 | Technovinyl Polymers India Ltd. | PVC Elastomer | K-Flex |
| Hytrel® 8238 | DuPont Performance Polymers | TPC-ET | Hytrel® |
| PLUSTEK PB300G33/310G6 | Polyram Ram-On Industries | Nylon 6 | PLUSTEK |
