Order Products : sales@su-jiao.com
EPIGUM DPE/80
| Category: | TPV , Thermoplastic Vulcanizate |
| Manufacturer: | Crosspolimeri S.p.A. |
| Trademark: | EPIGUM |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 01G4Kv_EPIGUM-DPE-80.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
EPIGUM DPE/80 is a thermoplastic elastomer. EPIGUM DPE/80 is a dynamically crosslinked thermoplastic vulcanizate (TPV) |
| General Information | |
|---|---|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 0.950 | g/cm³ | ASTM D792 |
| Moisture | 0.030 | % |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A) | 80 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength | 10.2 | MPa | ASTM D638 |
| Tensile Elongation (Break) | 500 | % | ASTM D638 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Set (100% Strain) | 17 | % | ASTM D412 |
| Tensile Stress 1(100% Strain) | 3.90 | MPa | ASTM D412 |
| Tear Strength 2(23°C) | 43.8 | kN/m | ASTM D624 |
| Compression Set (100°C, 22 hr) | 40 | % | ASTM D395B |
| Aging | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Change in Mass (121°C, 24 hr) | 65 | % | ASTM D471 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Brittleness Temperature | < -60.0 | °C | ASTM D746 |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 80.0 to 90.0 | °C | |
| Drying Time | 2.0 to 3.0 | hr | |
| Cylinder Zone 1 Temp. | 200 | °C | |
| Cylinder Zone 2 Temp. | 205 | °C | |
| Cylinder Zone 3 Temp. | 210 | °C | |
| Cylinder Zone 4 Temp. | 220 | °C | |
| Cylinder Zone 5 Temp. | 230 | °C | |
| Die Temperature | 230 | °C |
| Note Message | |
|---|---|
| 1 . | Die C |
| 2 . | Die C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| TERRAMAC HV-6250H | UNITIKA Plastics Division | PLA | TERRAMAC |
| UNITAL® H | Nytef Plastics, Ltd. | Acetal (POM) Homopolymer | UNITAL® |
| ALTECH® ABS FC 1000/106 | ALBIS PLASTIC GmbH | ABS | ALTECH® ABS |
| Lucky Enpla LMA1000 | Lucky Enpla Co LTD | Acrylic (PMMA) | Lucky Enpla |
| Plyophen 43575 | Durez Corporation | Phenolic | Plyophen |
